Shurflo 4009 12V pump + FilterShurflo 1/2 Inch BSP Male To Female, Filter040860: SHURFLO 4009 12V Fresh Water PumpPump inlet and outlet ports: 1/2-14 NPSM male (1/2 inch BSP Works)Base View SHURFLO: 4009 12V Fresh Water PumpExample of Set UpAn accumulator is NOT required with this pumpFlow DirectionPump Dimensions1 / 9
SHURflo4009 Automatic Water Pump Kit with Filter12V / 11.3L/min / 45psi
Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
This SHURflo 4009 is an automatic 12V fresh water demand pump for caravans, motorhomes and other recreational vehicles. Its four-chamber diaphragm and internal bypass support high-flow demand, low noise and reduced cycling. The pressure switch starts the pump as system pressure falls and shuts it off at 45 psi. The pump is thermally protected, can run dry without damage and may be mounted in any position.
It is an ideal replacement for SHURflo Series 2088 pumps. This kit includes the pump and a twist-on inlet filter; connection fittings are sold separately. The filter must be used and the pump mounted internally to maintain importer warranty.
Features
Includes twist-on inlet filter
Ideal replacement for SHURflo Series 2088 pumps
Four-chamber diaphragm design
Internal bypass provides smoother low-flow operation and reduces rapid cycling
Self-priming up to 1.8 m vertically and capable of running dry without damage
Thermal overload protection with automatic restart
No accumulator required for normal installation; one may still be fitted if desired
C-Tick approved
1 year warranty.
Specifications
Other Identifier: 4009-101-A87
Brand: SHURflo
Voltage: 12V DC
Maximum flow rate: 11.3 L/min (3.0 GPM)
Motor duty: Intermittent
Automatic pressure switching: Yes
Pressure shut-off: 45 psi (3.1 bar)
Restart pressure: 30 psi (2.1 bar)
Maximum inlet pressure: 30 psi (2.1 bar)
Maximum liquid temperature: 54°C
Maximum current: 5.2 A
Recommended fuse: 7 A
Connection fittings: use the listed SHURflo or 1/2 inch BSP fittings
Internal bypass: Yes
Dry prime height: 1.8 m
Pump dimensions: 111 mm (W) x 125 mm (H) x 205 mm (D)
Inclusions: 1 x pump and 1 x twist-on inlet filter; connection fittings sold separately
These pumps have some water present as they have been fully tested by the manufacturer before being sent to Australia. The pump ports are technically 1/2-14 NPSM, but the standard Australian setup uses the listed SHURflo or 1/2 inch BSP fittings, including the John Guest 12mm adaptor.
These are not supplied in a retail box and are as per what is supplied to the major caravan manufacturers in Australia.
These pumps are designed for internal installation only. Mounting externally will void all warranty claims.
The importer will not warrant pumps that have not been used with a filter, or where thread tape has been used, or where the thread has been tightened mechanically, or that have been installed outside the body and suffer from dust ingress. Additionally, the pressure switch is set from the factory. Any adjustment will be detected and void the warranty.
