Description
The SHURflo accumulator tank is a bladder-type pressure storage vessel and pulsation dampener designed to hold water under pressure. It provides additional water storage to assist the pump in meeting system demand and reduces pressure-switch-controlled pump on-off pulsation.
The pre-charged air chamber provides a small water reserve between pump cycles. The 620mL rating is the total air-and-water volume; stored water is typically about 60-120mL, depending on the pre-charge and the pump's switching pressures.
For best performance, set the air pre-charge to the pump's cut-in pressure-the pressure at which it starts. Check and adjust it with the pump switched off and a tap open to release water pressure.
Features
- Reduces pump on-off cycling and water-flow pulsation.
- Pre-charged bladder design maintains a pressurised water reserve between pump cycles.
- Not recommended for SMART sensor pumps.
- 1 year warranty.
Specifications
- Manufacturer Part Number: 181-201
- Brand: SHURflo
- Barcode: 181-201.
- Max Working Pressure: 125 PSI.
- Total Volume: 620mL, including air and water.
- Diameter: 95mm.
- Length: 22cm.
- Connections: 1/2 inch BSP female inlet and outlet.
- Installation: on the pressurised side of the plumbing; either port can be used as the inlet.
- Fitting requirement: insert rubber washers in both ports and use plastic or nylon threaded fittings.
- Shipping Weight: 500 grams.
- Shipping Dimensions: 18 cm x 24 cm x 31 cm.
Community Photos
Connections
This product connects to other products that we sell. It has the following connections:
Click to Show Connecting Products