Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
This is a John Guest WaterMark certified Speedfit Twist & Lock 12mm elbow. It can be used on the standard John Guest Speedfit tubing (LLDPE) and the WaterMark 12mm tubing (BPEX).
Ensure you use the matching pipe inserts with each style tubing; i.e. do not use WaterMark inserts with standard John Guest Speedfit tubing (LLDPE).
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection, unlock the nut, push the collet towards the body of the fitting and pull the pipe to release.
Features
Suitable for use on standard Speedfit 12mm tubing (LLDPE) and WaterMark 12mm tubing (BPEX)
1 year warranty.
Specifications
Manufacturer Part Number: PEM0312W
Brand: John Guest
Barcode: 665628031463
Connections: 2 x 12 mm push-on sockets
WaterMark-certified Speedfit Twist & Lock fitting
Pressure rating: 2000 kPa at 1-20 °C; 1000 kPa at 70 °C
Suitable for LLDPE and BPEX tubing; use the matching pipe insert for the tube type
Increased O-ring compression for a positive water seal
Shipping Weight: 30 grams.
Shipping Dimensions: 5 cm x 5 cm x 3 cm.
Further Information
Video Guide
Our Comments
The introduction of the WaterMark range was prompted by changes in Victorian plumbing legislation back in 2017, mandating the use of WaterMark certified products on hot water lines in all new caravans and motorhomes manufactured within Victoria. The rest of Australia has not adopted the standard and the original Speedfit range has remained the dominant style.
