Suburban SW5ECA Hot Water System - Electric - 17.7L - 240V - White DoorWhite access door supplied with the Suburban SW5ECA hot water systemClose-up of the access door latchInside view of the Suburban SW5ECA white hot water system access doorThree mounting screws supplied with the Suburban SW5ECA hot water system1 / 5
SuburbanSW5ECA Hot Water SystemElectric · 17.7L · 240V · White Door
Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
This Suburban is a 240V only water heater and has been WaterMark certified for the Australian market. The Suburban range of water heaters includes gas, 240V and gas/electric models and offers manual or 12V ignition. Manufactured in the USA featuring a steel tank with porcelain lining for an extended life and copolymer insulation jacket for superior heat retention.
These hot water systems fit under a seat or in the back of a cupboard, with a door and access from the outside of the RV.
The water inlet and outlet are at the rear, so allow some space for connections. This model is pre-fitted with a 240V plug for easy connection to a GPO in your RV.
Features
Easy to replace anode rod for corrosion protection
Pressure relief valve has a compression fitting to suit 1/2 inch copper pipe.
The unit comes with the main tank as shown, plus a separate door.
Easy access, foam tank insulation and high recovery rate.
Range of spare parts available.
2 year warranty.
Specifications
Manufacturer Part Number: 5251A
Other Identifier: SW5ECA
Brand: Suburban
Barcode: 210546702
Replaces older model SW5EA
Heating source: 240 V
Capacity: 17.7 L
Recovery: 21 L/hr 45° rise
Dimensions (mm): 320 (w) x 320 (h) x 450 (d) (plus pipe connections at rear)
Includes door - Overall dimensions: 380 mm x 380 mm
240 V - 50 Hz AC, 1440 W - 6 A.
Pressure relief valve: 700 kPa
WaterMark certified
Cold water inlet is 1/2 inch female BSPT
Hot water outlet is 1/2 inch female BSPT
Anode thread is 3/4 inch female NPT.
The unit will slide in from the outside, in a cutout of 330 mm high and 325 mm wide.