Description
The SHURflo accumulator tank is a bladder-type pressure storage vessel and pulsation dampener designed to hold water under pressure. Its pre-charged air chamber stores a small reserve of water, helping a pressure-switch-controlled pump run less frequently and smoothing flow between pump cycles.
The 620mL rating is the total air-and-water volume, not the usable water reserve. Stored water is typically about 60-120mL, depending on the pre-charge and the pump's switching pressures.
For best performance, set the air pre-charge to the pump's cut-in pressure-the pressure at which it starts-not its cut-out pressure. Check and adjust it with the pump switched off and a tap open to release water pressure.
Features
- Reduces pump on-off cycling and water-flow pulsation.
- Pre-charged bladder design maintains a pressurised water reserve between pump cycles.
- Not recommended for SMART sensor pumps.
- 1 year warranty.
Specifications
- Manufacturer Part Number: 182-200
- Brand: SHURflo
- Barcode: 754009930
- Pre-Charge Pressure: 30 PSI.
- Max Working Pressure: 125 PSI.
- Total Volume: 620mL, including air and water.
- Diameter: 95mm.
- Length: 22cm.
- Connections: 1/2 inch BSP male inlet and outlet.
- Includes: accumulator tank and dual swivel connector.
- Installation: after the pump, before filters or check valves that add backpressure; either port can be used as the inlet.
- Fitting seal: seals on the internal port taper, not on the threads.
- Shipping Weight: 630 grams.
- Shipping Dimensions: 29 cm x 12 cm x 14 cm.
Community Photos
Connections
This product connects to other products that we sell. It has the following connections:
Click to Show Connecting Products