Estimated dispatch: Fri 30 Oct
Postage Australia Wide
Enter your postcode for a delivery estimate.
Check arrival using your postcode.
Show us a photo or model number. We’ll help you check before you buy.
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
This is the replacement centre/main lock for Camec 3-point security doors. The upper and lower remote latches are separate parts.
For this left-hand version, stand outside the recreational vehicle and look at the door: the hinges must be on the left.
Slide the locking snib down to reveal the hidden third retaining screw, then remove the three screws to release the inner and outer main-lock sections.
See the attached PDF for the complete fitting procedure, including rack engagement and barrel positioning.
Tip - How to remove your old lock barrel (without aqua/grey logo on handle):
After removing lock assembly from the door, hold the handle open, then turn and pull the rear metal lock activator (cylinder).
To remove the key barrel, working from the rear, depress the small metal wafer into the lock while the lock is rotated so the square protrusions on the lock line up with the gaps in the housing. The lock should now slide out the front.
No concerns with the mechanisms for delivering the part, it arrived quickly and conveniently at the local post office but the $10 delivery cost for a $10 component no bigger than a medium size screw was excessive. This may be the standard delivery cost but this needs to be reviewed by administration within your company.
Excellent service and product
Very fast turn around. Item as expected. Will purchase from.here again.
