Nothing in cart
Super fast postage, well packaged
Estimated dispatch: Fri 30 Oct
Free Postage Australia Wide
Check arrival using your postcode.
Show us a photo or model number. We’ll help you check before you buy.
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
The Fiamma F45s is a wall-mounted cassette awning with a protective case for campervans, motorhomes and caravans.
These easy-to-use awnings can be operated by a single person and allow you to double your living space in under a minute to make the most of the outdoors. Fully enclosed in a solid case when stowed and with no hardware running down the side of the vehicle, these are great for use on campervans, motorhomes or any vehicle with a vertically curved wall. From shade screens & sidewalls to a complete annex solution, Fiamma's incorporated design offers a range of options & accessories to customise your outdoor area.
A detachable winder is used to extend the awning. Winding allows the front face of the sturdy case to extend horizontally, like a verandah - pulling the fabric out as it goes. At about 1 m extension, unclip the telescopic legs from within the front face and lower them to support the awning before winding it out further. This avoids unnecessary strain on the awning and vehicle wall. Once fully extended, adjust the legs to the required height and secure them either to the ground with pegs or to the base of your RV with the included lower leg brackets.
All awnings come complete with the standard bracket kit which allows the awning to be attached to a vertical face on a caravan/motorhome/gooseneck etc. If the awning is being attached to a curved surface or roof rack you will need to purchase a separate bracket kit or make a mounting that will accept the standard brackets. See section on BRACKETS for options.
Fiamma offers a range of anti-flap solutions. Straight and curved roof rafters add tension to the canopy to help reduce flapping and water pooling.
The Fast Clip system provides the greatest strength and enables full side walls to be added to form a complete enclosed area (this is included in all Privacy Room Kits).
The F45s is designed primarily for sun protection. Retract the awning in wind, rain or snow. If light rain is unavoidable, lower one support leg to provide fall for drainage, fit the included tension rafter, keep the legs secured and do not allow water to pool on the canopy.
Super fast postage, well packaged
Quick service and fast delivery
The service is professional and knowledgeable, they almost always have the right parts which you can identify first from their brilliant comprehensive website, and postage is extremely quick, they are the only ones I use when I need parts.