Coast Annex Wall Kit 2.4m Deep / 2.7m High · Suits 17ft Carefree, Dometic & Other Roll-Out Awnings

Description

A DIY awning wall kit to suit Carefree and Dometic rollout awnings, plus other rollout awnings available in Australia. Will suit awnings that are up to 2.4m wide (8 feet), with a roof mount up to 2.7m high (9 feet).

There are a number of interchangeable components that are included in every kit to provide a solution for every compatible awning.

If any gas appliance exhausts into the annex, ventilation must be provided in the draught skirt.

Features

• Suitable for pop-tops and caravans
• Suitable for variable height up to 2.7 m (9 feet) from ground
• Draught skirt and wheel covering included made from non-fraying grey PVC
• The walls are constructed of weaved polyester yarns 0.46 mm thick
• Windows are made from clear PVC 0.27 mm thick
• Opening door at each end and long wall
• Clear zippered windows with flyscreens
• External window flaps
• Adjustable angle for end walls
• The awning roof clips over the end walls to provide a draught and water-resistant junction.
• Floor is not included.
• Polyester is known for its strength and durability. It is resistant to stretching, shrinking, wrinkles, mildew, scratching and even some chemicals
• Measure from centreline to centreline of legs.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 150-03050
• Brand: Coast to Coast RV
• Suits variable roof width up to 2.4 m (8 ft)
• Suits a 17 ft rollout awning, as measured between centre lines of awning legs.
• Long wall is around 15 ft 7 inch long
• Shipping Weight: 45.70 Kgs.
• Shipping Dimensions: 32 cm x 22 cm x 176 cm.

Further Information

• View the related PDF: Coast Awning Wall Kit Installation Instructions

Guide to Awning Privacy Screens

Read