12V Socket & Power Supply Wall Plate Suits Winegard TV Antennas

Description

Winegard replacement power-supply wall plate with a front TV outlet and 12V accessory socket. It supplies power through the antenna coaxial cable to the amplifier in a Winegard amplified RV antenna; the wall plate itself is not a signal amplifier.

Switch ON for antenna reception: the green indicator lights and power is supplied to the antenna. Switch OFF to select an external cable-TV feed connected to the rear CABLE input; the indicator goes out and antenna power is disconnected. The rear SET 2 output provides a connection for a second TV.

Features

• New model - This unit is equipped with a polyswitch (current limiting device), which will shut down 12 V if there is a direct short between the antenna and power supply. Green indicator light will not light. Once the short is eliminated, the device will reset itself in approximately 2 minutes.
• Do not connect high current devices to the 12 V receptacle like hair dryers. Max current 7.5 A.
• 1 year warranty.

Specifications

• Manufacturer Part Number: CC-RV42
• Brand: Winegard
• Measures 115 mm x 70 mm (has PC board on rear).
• Requires a 12 V DC supply connected to the rear power and ground terminals.
• 75-ohm F-type coaxial connections: front TV outlet; rear ANTENNA input, CABLE input and SET 2 output.
• Use only with a Winegard amplified RV antenna.
• Keep the switch OFF when connecting cables or power wires.
• Shipping Weight: 110 grams.
• Shipping Dimensions: 6 cm x 11 cm x 18 cm.

Community Photos