Nothing in cart
Highly recommended, good communication.
Estimated dispatch: Mon 23 Nov
Postage Australia Wide
Enter your postcode for a delivery estimate.
Check arrival using your postcode.
Show us a photo or model number. We’ll help you check before you buy.
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
The Breaksafe RM6000 remote battery monitor is fitted to the dash of the tow vehicle and checks the condition of the Breaksafe battery each time the brake pedal is pressed.
If the battery is low, a red light will illuminate on the front panel and a buzzer will sound for about 10 seconds.
A green light indicates the battery is good.
This is a wired monitor. Its sensor connection must run through the vehicle and trailer plug to the Breaksafe unit, and a 12V auxiliary charging feed from the tow vehicle is required for correct operation.
Although these are a remote, they are not wireless. They need to be wired in.
The manufacturer states: The RM6000 Remote Battery Monitor can only be used in conjunction with a Breaksafe 5000 or 6000 breakaway kit. It will not work correctly when connected to any other breakaway system.
These will give a slight smell during initial usage as protective coating melts off an internal resistor. This is not a fault and will disappear.
Highly recommended, good communication.
Good easy to use website. Breaks down your search & really good photos, so you know what you are buying. Quick order procesing and delivery time.
Awesome and quick if you know what you want! Would have been nice to speak to someone about the parts I ordered, but I got it right and ended up with the right parts!