Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
The Eberspacher Airtronic S2 bridges the gap between their European flagship S3 heater and more economical competing brands. Both the S2 D2L and S3 D2L provide automatic altitude adjustment up to 3,000 m. The S2 is a great value alternative for the Australian market. Coming in at 200 g heavier and consuming a mere 0.01 L/h more fuel the S2 is still built to the same high standards with a brushless motor for extended service life, quiet operation and sleek LCD controller.
The Eberspacher AS2 can be used in campervans, caravans or camper trailers with the optional 10 litre diesel fuel tank, or by getting fuel direct from the vehicle fuel tank in diesel-operated motorhomes.
Features
Electronic speed control with gentle adjustment
Stepless heating performance control
Brushless motor - 5,000 h service life
Flexible installation with 90 degree tilt possible to either side
Quiet operation
Low fuel/power consumption
EasyStart Pro controller
Fan function possible for summer operation
Safe for use while driving without the need for additional components
A diesel tank or fuel pickup pipe may be required if you cannot tap into an existing fuel line
Diagnostics and parameter assignment via EasyScan
Can also be integrated into on-board systems via CAN (12 V), LIN (12 V), S+ (12/24 V) interfaces
2 year warranty.
Specifications
Brand: Eberspacher
Voltage: 12 V
Heating Capacity: 2.2 kW
Hot-air mass throughput: 42–105 kg/h (without backpressure, with 75 mm hood)
Fuel Consumption: 0.10–0.28 L/h
Suitable Altitude Limit: 3,000 m
Fuel type: Diesel
Dimensions (mm): 310 (L) x 115 (W) x 122 (H)
Weight: 2.7 kg
Single Outlet Kit Includes:
2 m air ducting
1 x 60 mm air outlet
EasyStart Pro controller
Exhaust silencer
Lead harness
Metering pump
(A full list of components can be found on pages 9-10 of the linked manual)
For twin outlet installations an additional outlet kit must be purchased separately (shown below in related products)
Please note all diesel air heaters need to be run at a high power setting for around 15 min every 4–5 hours to prevent carbon build-up. If this is not done and the heater fails due to carbon build-up this is not covered by warranty.