BMPRO Dipper Water Tank Sensor 2.5m

Description

Easy to install tank sender used to measure water level in your caravan or RV water tank.

Installation Instructions

1. Empty the water from the tank(s)
2. Choose a suitable side of the tank where the level-sensing can be located.
3. Drill the required hole in the tank
4. Install the tank sensor to the tank
5. Connect sensor connector to the water tank loom
6. Fill the tank(s) and check for water leaks around the bungs. Reseal as necessary.
7. Test operation of water level sensors.

Features

• Easy Installation
• Fits existing water tanks
• Compatible with BMPRO Trek and Drifter units for tank reading display
• Suitable for use in caravans, boats, motor homes and camper trailers
• Suitable for plastic and metal water tanks
• 1 year warranty.

Specifications

• Manufacturer Part Number: DIPPER2.5
• Brand: BMPRO
• Barcode: 799439885530
• Ring terminal: stainless steel 316 corrosion resistant properties
• 5-pin connector: Eliminates need to rewire if retrofitting
• Mounting Hole required: 22 mm
• Cable Length: 2.5 m
• The straight part of the dipper is roughly 200 mm
• Shipping Weight: 260 grams.
• Shipping Dimensions: 18 cm x 29 cm x 6 cm.

Further Information

Video Guide