Tubular Canopy Lifter 30kg / 900mm Wide / 685mm Lift · Each

Description

This spring-loaded tubular-steel scissor lifter raises and supports the roof of a pop-top caravan or camper. It is sold individually and is intended as a like-for-like replacement for a 900 mm tubular lifter.

Do not use it as a direct replacement for a Breha or other flat-bar lifter. The tubular hinge is wider and may catch when folded, particularly where the roof was designed around the slimmer flat-bar style.

Features

• Replace opposite lifters at the same time to keep the roof support balanced and reduce stress that can bend the arms.
• Match the fixed-corner orientation of the original lifter; the required orientation varies by side.
• Converting from scissor lifters to gas struts is not a direct swap because the mounting position must balance the roof in both raised and lowered positions.
• 1 year warranty.

Specifications

• Construction: tubular steel scissor arms with steel upper and lower tracks.
• Spring: standard tension, included.
• Lift rating: 30 kg per lifter.
• Lower bracket length: 900 mm.
• Maximum lift height: 685 mm.
• Closed cross-section: 65 mm high x 55 mm wide.
• Mounting: holes in the vertical and horizontal faces.
• Supplied quantity: 1 canopy lifter.
• Shipping Weight: 2.85 Kgs.
• Shipping Dimensions: 5 cm x 7 cm x 93 cm.

Community Photos