Thetford Access Door 4 Black / 345 x 645mm Cut-Out

Description

The Thetford Service Door 4 provides external access to gas-cylinder, water-tank, generator or barbecue compartments. It is supplied as a door and frame assembly without the centre infill panel; the section cut from the caravan wall is normally fitted into the door to retain the exterior finish.

It can be installed horizontally or vertically in a flat side wall.

Features

• UV-resistant construction with a double seal for weather protection and insulation.
• Two lockable push-button latches hold the door securely closed.
• Suitable for horizontal or vertical installation.
• Three-sided rain diverter.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 2681827
• Brand: Thetford
• Colour: Black.
• Overall frame size: 700 x 395 mm.
• Usable opening: 630 x 330 mm.
• Nominal cut-out: 645 x 345 mm with rounded corners; follow the supplied paper template for the cutting profile.
• Suitable wall thickness: 23-39 mm.
• Supplied with the door and frame assembly, two lockable push-button latches, mounting clips and screws, and a paper cutting template.
• Centre infill panel is not supplied and is normally made from the removed wall section.
• An infill around 23 mm thick gives the best internal finish. Thinner panels require packing; thicker panels can be accommodated but may not sit flush on the inside.
• Install in a flat side wall only; not suitable for roof, floor or vehicle-front installation.
• For vertical installation, position the frame hinges towards the direction of travel.
• Shipping Weight: 2.23 Kgs.
• Shipping Dimensions: 5 cm x 41 cm x 70 cm.

Further Information

• View the related PDF: Thetford Service Doors Installation Manual

Community Photos