Stabil-Mate Hydraulic Caravan Stabiliser Leg Kit 500mm / 4 Legs

Description

Stabil-Mate is a manually operated hydraulic stabilising system for caravans and trailers. The A-frame-mounted pump station uses individual control valves to lower the four 500mm corner stabiliser legs from one location.

This system is for stabilising only. Do not use it as a jack or together with a jack. The pump station must be bolted, not welded, to the A-frame, and all four legs are installed parallel to the chassis and facing rearwards.

Kit Includes

• Central pump station
• Pump handle
• 4 x 500mm hydraulic stabiliser legs

Required but Not Included

• 6mm (1/4 inch) copper tube for the hydraulic lines
• Approximately 600mL of transmission fluid; do not use another oil type

Features

• Central hand-pump operation from the caravan A-frame
• Individual valves control the hydraulic supply to each stabiliser leg
• All four legs equalise after contacting the ground when operated together
• Spring-assisted leg retraction
• 1 year warranty.

Specifications

• Barcode: 9338034000040
• Leg length: 500mm
• Supplied quantity: 4 stabiliser legs, 1 pump station and 1 pump handle
• Hydraulic line required: 6mm (1/4 inch) copper tube, not included
• Fluid required: Approximately 600mL transmission fluid, not included
• Maximum leg deployment angle: 70 degrees
• Pump mounting: Bolt to caravan A-frame; do not weld
• Leg mounting orientation: Parallel with the chassis and facing rearwards
• Pump station dimensions: 235 x 125 x 190mm (190mm H)
• Shipping Weight: 30.40 Kgs.
• Shipping Dimensions: 21 cm x 40 cm x 54 cm.

Further Information

• View the related PDF: Stabil-Mate Hydraulic Caravan Stabiliser Leg Kit Manual

Community Photos