This product is no longer available. The information below is retained for reference.
After removing lock assembly from the door, hold the handle open and turn and pull the rear metal lock activator (cylinder).
To remove the key barrel, working from the rear, depress the small metal wafer into the lock while the lock is rotated so the square protrusions on the lock line up with the gaps in the housing. The lock should now slide out the front.
To Add the lock barrel
Place the key in the lock and turn so the square protrusions on the lock line up with the gaps in the housing. Place the barrel at an angle so the wafer enters the housing first and depresses itself while the remainder of the lock to pushed in. The wafer should pop out to secure the lock in place.
No concerns with the mechanisms for delivering the part, it arrived quickly and conveniently at the local post office but the $10 delivery cost for a $10 component no bigger than a medium size screw was excessive. This may be the standard delivery cost but this needs to be reviewed by administration within your company.
Excellent service and product
Very fast turn around. Item as expected. Will purchase from.here again.
