Nothing in cart
Easy ordering and prompt delivery
1st order by Suzanne from VIC
Estimated dispatch: Mon 16 Nov
Postage Australia Wide
Enter your postcode for a delivery estimate.
Check arrival using your postcode.
Show us a photo or model number. We’ll help you check before you buy.
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
This 12-24V rear combination lamp provides stop, tail and indicator lighting without a reversing light. Mount the bracket horizontally on a flat surface using the supplied screws, route the wires through the back and clip the lamp into place. The clip-in design allows access to the mounting screws from the front.
Lamp Removal
Method 1: Working from the front - insert a 10mm flat screwdriver between the bracket and the lamp, where the clip slots into the bracket. If the lamp does not clip out immediately, slightly lever the lamp enough to click the lamp from the bracket.
Method 2: Working from the back - insert a minimum 10mm flat screwdriver into the bracket against the clip of the lamp and lever the shaft of the screwdriver against the lamp and stretch the bracket out until the light clicks from the bracket. The brackets are very strong and will not break, providing the correct screwdriver is used. If you are unsure about removing the lamps, phone LED Autolamps on 1800 815 000 for assistance.
This is for one (1) unit, not a pair. Uno, Un, Enis!
Easy ordering and prompt delivery
The right product and excellent service.
Once again CaravanPlus has outdone itself in regards to provision of service with quick and reliable delivery of items required, items which most caravan shops are not carrying for some reason Thanks CaravanPlus