Estimated dispatch: Mon 26 Oct
Postage Australia Wide
Enter your postcode for a delivery estimate.
Check arrival using your postcode.
Show us a photo or model number. We’ll help you check before you buy.
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
This is a John Guest WaterMark certified Speedfit Twist & Lock 12mm Stem Elbow. The stem fitting can be coupled with push-on fittings to create custom fittings as required.
It can be used on the standard John Guest Speedfit tubing (LLDPE) and the WaterMark 12mm tubing (BPEX). Ensure you use the matching pipe inserts with each style tubing, i.e. DO NOT use WaterMark inserts with standard John Guest Speedfit tubing (LLDPE).
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection, unlock the nut, push the collet towards the body of the fitting and pull the pipe to release.
The introduction of the WaterMark range was prompted by changes in Victorian plumbing legislation back in 2017, mandating the use of WaterMark certified products on hot water lines in all new caravans and motorhomes manufactured within Victoria. The rest of Australia has not adopted the standard and the original Speedfit range has remained the dominant style.
So accommodating with my request, quick response and follow up on the tracking of the product, will definitely be my go to for my next caravan update 😊
Parts took a while due to supplier issues - however, Caravan Plus kept me updated during the whole process and I successfully received my parts in good order. Although my order was small and inexpensive, I felt like they handled it with as much importance as a large scale order. Nice to see this level of service still exists. Well done Caravan Plus.
Very quick delivery and exactly what was needed!
