Water, 12mm JG Push-On, Pipe To 3/8 Inch Male BSP, SwivelJG 12mm Push-On to 3/8 Inch Male BSP, SwivelJG 12mm Push-On to 3/8 Inch Male BSP, SwivelJG 12mm Push-On to 3/8 Inch Male BSP, Swivel3 Easy Steps1 / 5
John Guest12mm Swivel Elbow Adaptor12mm Push-On x 3/8 inch Male BSP
Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
Connects 12mm John Guest pipe or a 12mm fitting stem to a 3/8 inch female BSP port, turning the pipe run through 90 degrees. The male threaded section swivels for alignment, and the external O-ring provides the thread-end seal.
For the push-on connection, cut the pipe square, remove any burrs, push it fully to the internal stop, then pull back to confirm it is secure.