Enerdrive B-TEC Ultra Gen3 460Ah Lithium Battery IP67 / Bluetooth

Description

The B-TEC ULTRA is a 12V 460Ah lithium battery for high-capacity caravan, 4WD, trailer, marine and off-grid power systems. It has the same 500 x 265 x 245mm external dimensions as the B-TEC ULTRA 300Ah model, with 160Ah more storage capacity (about 53% more). Its 300A continuous output supports demanding loads such as inverters, induction cooktops, compressors and refrigeration, while the IP67 enclosure suits installations exposed to dust and water.

An integrated battery management system monitors voltage, current and temperature and provides overcharge, over-discharge, short-circuit and thermal protection. Battery status can be viewed through the Enerdrive B-TEC Bluetooth app, the built-in LED display or compatible equipment connected through the CAN/485 communication port.

Features

• IP67 dust and water protection, including temporary immersion to 1 metre for up to 30 minutes
• IEC 62619 safety certification at cell and completed battery-pack level
• Integrated BMS with high/low-voltage, overcurrent, short-circuit and temperature protection
• Automatic cell heater supports charging in freezing conditions
• Bluetooth monitoring through the Enerdrive B-TEC app for iOS and Android
• CAN/485 communication for compatible monitoring and control equipment
• Four-stage LED state-of-charge display with fault indication
• Built-in on/off control isolates the battery terminals during storage or servicing
• System/reset button assists with checking status and restarting a discharged battery
• Supports banks of up to four batteries in series and four in parallel
• 5 year warranty.

Specifications

• Manufacturer Part Number: EPL-460BT-12V-G3
• Brand: Enerdrive
• Battery capacity: 460Ah
• System voltage: 12V
• Maximum load current: 300A at 25°C
• Peak discharge current: 1000A for 5 seconds
• Maximum charge current: 300A at 25°C
• Nominal charge current: 150A
• Charge voltage: 14.2-14.6V
• Standby float voltage: 13.5-13.6V
• Charge temperature range: -20°C to 60°C
• Discharge temperature range: -20°C to 60°C
• Low cell-voltage disconnect: ≤2.80V
• High cell-voltage disconnect: ≥3.75V
• Cycle life: More than 6,000 cycles at 80% depth of discharge
• Communication protocol: CAN/485
• Communication port: M12-6P
• Terminals: 2 positive and 2 negative M8 terminals
• Terminal torque: 8-10N·m
• Dimensions: 500mm long x 265mm wide x 245mm high
• Weight: 44.5kg
• Supplied with: Battery tray and retaining straps
• Initial use: Fully charge the battery before use

Further Information

• View the related PDF: Enerdrive B-TEC Ultra Gen3 Owner's Manual