Enerdrive B-TEC Ultra Gen3 200Ah Lithium Battery IP67 / Bluetooth

Description

The Enerdrive B-TEC ULTRA Gen3 is a 12V 200Ah lithium battery for caravan, 4WD, trailer, marine and off-grid power systems. It is narrower and lighter than the 300Ah and 460Ah models, measuring 485 x 172 x 245mm and weighing 23kg. Its 200A continuous output supports substantial 12V loads, while the IP67 enclosure protects against dust and temporary water immersion.

An integrated battery management system monitors voltage, current and temperature and provides overcharge, over-discharge, short-circuit and thermal protection. Battery status can be viewed through the Enerdrive B-TEC Bluetooth app, the built-in LED display or compatible equipment connected through the CAN/485 communication port.

Features

• IP67-rated for marine and exposed installations
• IEC 62619 certified at cell and completed battery-pack level
• Integrated BMS with high/low-voltage, overcurrent, short-circuit and temperature protection
• Automatic cell heater supports charging in freezing conditions
• 200A continuous discharge
• 6,000 charge cycles at 80% depth of discharge
• Bluetooth monitoring via app for iOS and Android
• CAN/485 communication for compatible monitoring and control equipment
• Built-in LED display shows state of charge in 25% increments and indicates faults
• Built-in on/off button isolates the battery terminals during storage or servicing
• System/reset button assists with status checks and restarting a discharged battery
• Pressure relief valve equalises internal and external pressure to maintain the IP67 seal
• Battery tray and retaining straps included
• 5 year warranty.

Specifications

• Manufacturer Part Number: EPL-200BT-12V-G3
• Brand: Enerdrive
• Battery capacity: 200Ah
• System voltage: 12V
• IP rating: IP67
• Certification: IEC 62619 at cell and completed battery-pack level
• Maximum load current: 200A at 25°C
• Peak discharge current: 800A for 5 seconds
• Maximum charge current: 200A at 25°C
• Nominal charge current: 100A
• Charge voltage: 14.2-14.6V
• Standby float voltage: 13.5-13.6V
• Charge temperature range: -20°C to 60°C
• Discharge temperature range: -20°C to 60°C
• Low cell-voltage disconnect: ≤2.80V
• High cell-voltage disconnect: ≥3.75V
• Cycle life: 6,000 cycles at 80% depth of discharge
• Communication protocol: CAN/485
• Communication port: M12-6P
• Terminals: 1 positive and 1 negative M8 terminal
• Terminal torque: 8-10N·m
• Supports banks of up to 4 batteries in series and 4 in parallel
• Dimensions: 485mm long x 172mm wide x 245mm high
• Weight: 23kg
• Supplied with: Battery tray and retaining straps
• Initial use: Fully charge the battery before use

Further Information

• View the related PDF: Enerdrive B-TEC Ultra Gen3 Manual

Video Guide