CaravansPlus Accessories Shop
Cart

Nothing in cart

Sign In

CaravansPlus.com.au
Bromic Two-Stage RV Gas Regulator Kit - LCC27 - Twin Cylinders - 450mm Pigtails - 3/8 inch SAE Test Point
Bromic Two-Stage RV Gas Regulator Kit - LCC27 - Twin Cylinders - 450mm Pigtails - 3/8 inch SAE Test Point
1 / 4
Bromic Lido

Bromic Two-Stage RV Gas Regulator Kit LCC27 · Twin Cylinders · 450mm Pigtails · 3/8 inch SAE Test Point

1 Review
$110
14 in stock

Estimated dispatch: Mon 5 Oct

Delivery to Your Door

Postage Australia Wide

Not Sure This Is the Right Part?

Show us a photo or model number. We’ll help you check before you buy.

Our Recommendation Promise

Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.

Description

Bromic's 160 MJ/h two-stage LPG regulator kit suits dual-cylinder caravan and RV installations with LCC27 cylinder valves. It includes a manual changeover valve, two 450 mm stainless steel braided pigtails, metal mounting bracket and 3/8 inch SAE test point adaptor.

The lever selects the cylinder in use. When that cylinder is empty, gas flow stops until the lever is turned to the full cylinder. The kit is supplied assembled and leak tested.

Features

  • Compact regulator designed for Caravan & RV installations.
  • Stainless steel braided LCC27 pigtails with hand wheel for easy installation
  • Manual changeover valve
  • Metal mounting bracket
  • Test point
  • Fully assembled & leak tested
  • 1 year warranty.

Specifications

  • Manufacturer Part Number: 6060586-27
  • Brand: Bromic Lido
  • Barcode: 9320688421357
  • Regulator capacity: 160 MJ/h.
  • Gas type: LPG (propane).
  • Nominal outlet pressure: 2.75 kPa; adjustable from approximately 2.6 kPa to 3.2 kPa depending on flow rate.
  • Maximum inlet pressure: 1750 kPa.
  • Operating temperature: -20 °C to 50 °C.
  • Outlet/test point adaptor: 3/8 inch SAE, suitable for flared 3/8 inch copper tube.
  • Pigtails: 2 x 450 mm Class F stainless steel braided hoses with LCC27 cylinder connections and 7/16 inch inverted-flare regulator connections.
  • Includes manual changeover valve, metal mounting bracket and test point adaptor.
  • Die-cast regulator body with fabric-reinforced NBR diaphragm.
  • Shipping Weight: 900 grams.
  • Shipping Dimensions: 7 cm x 24 cm x 24 cm.

Further Information

Our Comments

After any gas fittings are replaced, the gas system must be tested for leaks.

Question about this product?

Community Photos

Show Gas Regulators
Show All Gas Regulators
18 Products

Verified Community Reviews (1)

Check This Part With Us

Bromic Two-Stage RV Gas Regulator Kit - LCC27 - Twin Cylinders - 450mm Pigtails - 3/8 inch SAE Test Point

Ask Us. Buy With Confidence.

Ask us before ordering. If you buy the part we confirm for your setup and our recommendation is wrong, we’ll cover return postage and delivery of the correct replacement.

If we can’t supply a suitable replacement, we’ll refund the part.

We’ll explain any difference in the replacement part’s price before arranging the swap.

The promise applies to the setup and details we checked. If we can’t confirm suitability, we’ll say so before you buy. This is additional to your existing consumer rights.

Added to Cart

Checkout
Sub-Total:
Postage and delivery timing are confirmed at checkout.
Postage options shown at Checkout.
Edit CartCheckout

Combine & Save

It is cheaper to order multiple items at the same time than to place separate orders.

You can see the postage price by adding products to your cart and entering your postcode.

The minimum postage price is $11.40 and includes orders up to 1/2 a kilogram posted anywhere in Australia. For larger orders, postage is calculated from the total shipping weight plus a flag-fall cost. Prices vary by postcode.