Breha Canopy Lifter 40kg / 900mm Wide / 685mm Lift · Each

Description

Canopy lifters BREHA, 40kg, 900 wide, up to 685 high. These spring loaded scissor type roof lifters are made of solid flat steel.

Features

• Each lifter will hold up 40 kg of roof, with the standard spring included.
• The bottom bracket measures 900 mm long, and it can lift to a maximum height of 685 mm.
• When replacing, it is best to replace opposite lifters at the same time, to prevent undue stress which will bend the arms. These are stronger than the tubular arms.
• CARE - when fitting, ensure they are replaced in the same direction as they were i.e. if the fixed corner is on the right, replace it with the fixed corner on the right. This will vary for each side.
• The enlargement shows the bracket closed. The vertical height when closed is 70 mm and the width is 45 mm. The image shows the mounting holes in the vertical face, and there are also holes in the horizontal faces for alternate mounting.
• We do NOT recommend replacing the scissor style with the gas struts and alternate ends as it can take quite a lot of experimenting in position, which involves new holes being drilled each time as the opposing forces must be balanced to have correct location when up as well as when down.
• Price is for one unit.
• This quality product is Made in Australia.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 7-900
• Brand: Breha
• Lower bracket length: 900 mm.
• Maximum lift height: 685 mm.
• Lift rating: 40 kg per lifter.
• Closed cross-section: 71 mm high x 42 mm thick.
• Supplied quantity: 1 canopy lifter.
• Shipping Weight: 3.59 Kgs.
• Shipping Dimensions: 4 cm x 7 cm x 90 cm.

Our Comments

We have two different types of 900 wide canopy lifters and the mount holes are in slightly different places.

The Tubular lifter measures 927mm in length when closed with mount holes centres 900mm apart.

The Breha have flat bars and measure 900mm in length with mount holes centres 860mm apart.

Community Photos