Breha Canopy Lifter 35kg / 700mm Wide / 560mm Lift · Each

Description

This Breha spring-loaded scissor lifter raises and supports the roof of a pop-top caravan or camper. It has a 700mm channel, supports up to 35kg of roof per lifter and provides up to 560mm of lift.

Keep the lifter restrained before cutting its transport tape, as spring tension can force the mechanism open suddenly.

Features

• Each lifter will hold up to 35 kg of roof, with the standard spring included.
• The bottom bracket measures 700 mm long, and it can lift to a maximum height of 560 mm.
• When replacing, it is best to replace opposite lifters at the same time, to prevent undue stress which will bend the arms.
• These are stronger than the tubular arms.
• CARE - when fitting, ensure they are replaced in the same direction as they were, i.e. if the fixed corner is on the right, replace it with the fixed corner on the right.
• This will vary for each side.
• The enlargement shows the bracket closed. The vertical height when closed is 70 mm and the width is 45 mm. The image shows the mounting holes in the vertical face, and there are also holes in the horizontal faces for alternate mounting.
• This quality product is Made in Australia.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 7-700
• Brand: Breha
• 700 mm wide, 560 mm high.
• Lift 35 kg.
• Units: 1 x Canopy Lifter
• Shipping Weight: 2.78 Kgs.
• Shipping Dimensions: 4 cm x 7 cm x 70 cm.

Community Photos