Breha Canopy Lifter 35kg / 1200mm Wide / 930mm Lift · Each

Description

Canopy lifters Breha. These spring-loaded scissor-type roof lifters are made of solid flat steel. These are extra large.

Each lifter will hold up to 35kg of roof.

When replacing, it is best to replace opposite lifters at the same time to prevent undue stress which will bend the arms.

These are stronger than the tubular arms.

Care - when fitting, ensure they are replaced in the same direction as they were; i.e., if the fixed corner is on the right, replace it with the fixed corner on the right. This will vary for each side.

The enlargement shows the bracket closed. The image shows the mounting holes in the vertical face, and there are also holes in the horizontal faces for alternate mounting.

When this is in the fully down position the distance from fixed pivot point to the centre of the roller in the channel is 1120mm. When the roof is at 800mm high the distance is 820mm; when the roof is at its maximum height of 930mm, the distance is 620mm.

Features

• Each lifter will hold up to 35 kg of roof, with the standard spring included.
• The bottom bracket measures 1200 mm long, and it can lift to a maximum height of 930 mm.
• They are 5.7 kg each.
• When replacing, it is best to replace opposite lifters at the same time to prevent undue stress which will bend the arms.
• These are stronger than the tubular arms.
• CARE - when fitting, ensure they are replaced in the same direction as they were; i.e., if the fixed corner is on the right, replace it with the fixed corner on the right.
• This will vary for each side.
• The enlargement shows the bracket closed. The image shows the mounting holes in the vertical face, and there are also holes in the horizontal faces for alternate mounting.
• When this is in the fully down position the distance from fixed pivot point to the centre of the roller in the channel is 1120 mm. When the roof is at 800 mm high the distance is 820 mm; when the roof is at its maximum height of 930 mm, the distance is 620 mm.
• This quality product is Made in Australia.
• 1 year warranty.

Specifications

• Manufacturer Part Number: 7-1200
• Brand: Breha
• Barcode: 0008345
• 1200 mm wide, 930 mm high.
• Lift 35 kg.
• Units: 1 x Canopy Lifter
• Shipping Weight: 5.40 Kgs.
• Shipping Dimensions: 125 cm x 8 cm x 8 cm.