Bolt-On Spare Wheel Carrier 395mm Upright / 125mm U-Bolts · Suits Bumpers up to 100mm Deep

Description

Bolt-on spare wheel carrier for a caravan bumper or A-frame. The flat base includes 2 x 125mm U-bolts which cover up to 100mm of bumper thickness. On an A-frame, wheel orientation depends on the mounting rail: the supplied U-bolts fit the base in one orientation only and cannot be turned 90 degrees in the existing holes.

To mount the wheel, remove the centre nut and retaining disc, place the wheel over the centre bolt with one wheel stud hole over the locating pin, then refit the disc against the wheel and tighten the nut. The retaining disc is supplied with the carrier.

These are not recommended for large 4WD wheels.

Features

• 1 year warranty.

Specifications

• The upright is 395 mm from the bumper top to the centreline of the wheel mount.
• The wheel backing plate is 160 mm offset from the centreline of the upright.
• It has a 20 mm centre mounting bolt with provision to accept a padlock.
• Single locating pin that fits through one wheel stud hole (any stud pattern).
• The steel profile is 65 mm x 35 mm.
• Hole centres are 62 mm x 72 mm (U-bolts only fit as pictured).
• Includes one carrier, wheel retaining disc and centre nut, plus two 125 mm U-bolts with nuts and washers.
• Shipping Weight: 4.47 Kgs.
• Shipping Dimensions: 30 cm x 50 cm x 15 cm.

Community Photos