BMPRO BatteryPlus35-II-HA High-Amp Battery Management System

Description

BatteryPlus35-II-HA is a complete high amp battery management system designed to support transition of caravans to lithium batteries. The keystone of modern caravan electrical circuitry, it simultaneously accepts power from 240VAC, solar panels and DC auxiliary sources. Power is then distributed across your 12V circuits while the inbuilt multi-stage battery charger performs highly efficient charging and battery maintenance.

Built to handle the most extensive setup, the BatteryPlus 35 boasts a 12-circuit distribution board all protected by individual electronic fuses which can be easily reset. The advanced battery management system (BMS) systematically adjusts the output for optimal charging with a range of battery protection features.

Pairing with the BMPro Trek provides an easy-to-use interface for complete control and system diagnostics. Technical data is translated into key performance indicators which are displayed on a sleek remote LED monitor. Not only does the Trek display vital battery information such as remaining capacity calculated by usage, but it also includes water tank levels and dual pump controls.

Features

• Total output current 35 A
• 30 A multistage battery charger
• Inbuilt solar MPPT regulator (420 W, 30 A, 25 V max input)
• Distribution board with 12 at 10 A and 2 at 15 A DC outputs for load connection
• Electronic resettable fuses
• CAN bus connection for BMPRO accessories (Trek, OdysseyLink, CommLink/BC300)
• In-built battery management system (BMS)
• Solar and Aux blending
• Auxiliary DC input
• Load current limit
• Low voltage disconnect
• Compatible with lead acid and lithium (LiFePO4) deep cycle batteries
• 1 year warranty.

Specifications

• Manufacturer Part Number: BP35IIGAUHA
• Other Identifier: BP3511GAUHA
• Brand: BMPRO
• Barcode: 040626
• Input Voltage Range: 110 VAC to 240 VAC
• Input Surge: < 40 A (cold start)
• Output Current: 35 A continuous (load + battery current)
• Factory Set Voltage: 13.65 V (float voltage)
• Output Ripple Voltage: < 150 mV
• Over Voltage Protection: 18 V
• Over Current Protection: 35 A to 38 A (load + battery current)
• Battery Charge Current Limit: 30 A max
• Battery Disconnect Voltage Lead Acid: 10.8 V ± 0.2 V
• Battery Disconnect Voltage LiFePO4: 12 V ± 0.2 V
• Battery Drain after LVD: < 15 mA (when in storage mode)
• Efficiency: > 83%
• Cooling Fan: Thermally controlled
• Solar Output Current: 30 A (only if solar is installed)
• Solar Input Range: 15 V to 25 V
• Ambient Temperature: 0 °C - 50 °C
• Communication: communication bus available
• Dimensions (mm): 327 mm (W) x 82 mm (H) x 207 mm (D)
• Weight: 2 kg
• Standard: Safety: AS/NZS 60335.2.29, UL 458, UL 1741; EMC: AS/NZS CISPR 32, FCC Part 15; Approvals: RCM, UL, FCC
• Shipping Weight: 2.35 Kgs.
• Shipping Dimensions: 39 cm x 24 cm x 8 cm.

Further Information

• View the related PDF: BMPRO BatteryPlus35-II-HA High-Amp Battery Management System Manual
• View the related PDF: BMPRO BatteryPlus35-II-HA High-Amp Battery Management System Brochure

Video Guide

Electrical Shunts & RV Power Management

Read