The Nuovo Mapa telescopic table leg is ideal for use in caravans and RV's where the table drops to make a bed. The sliding turntable system allows the tabletop to be easily manoeuvred into many positions.
To lower into bed position just press the foot button and push top down. It will raise automatically when foot button is pressed again.
The bed position comes factory set at 330mm but this can be adjusted to suit your caravan or motorhome.
FeaturesTabletop can slide and rotate when the under-mounted lever is squeezed.
Top can move left or right, forward or back and swivel
Metal bearings make for a smooth sliding action with an aluminium sliding mechanism
Very solid construction
Foot button used to release table from bed position to table position - gas strut operated
Easy to install by screwing the base plate onto the floor
Adjustable bed height - see PDF for instructions 1 year warranty.
SpecificationsModel: 400-02600 Coast to CoastBrand: Tecno - Nuova MapaFully Extended Height: 710mm (floor to the underside of table top)
Minimum Height: 330mm (adjustable to 410mm)
Base Diameter: 250mm
Tabletop Bracket Dimensions: 710mm x 440mm (min table size)
Base plate is 240mm dia.
Tools Required to set Bed Height: Vice Grips & 8mm Socket Spanner (Not Included)
Table Top NOT IncludedShipping Weight: 15.00 Kgs.Shipping Dimensions: 49 cm x 60 cm x 41 cm.
Due to the many ways one may wish to fix the table bottom the floor, and also the platform in which it may be installed, there are far to many variables. As such no fixing kits are supplied, or available with these units.
It is up to the installer to decide how best to approach the installation, and procure the fasting system locally.