Show us a photo or model number. We’ll help you check before you buy.
Our Recommendation Promise
Buy the part we recommend for your setup. If we get it wrong, we’ll cover return postage and delivery of the correct replacement.
Description
The myCOOLMAN MCMU250 is the largest upright compressor fridge / freezer in the MCMU family. It provides a 185L upper refrigerator and an independently controlled 65L lower drawer that can be set anywhere from -18°C to +18°C for frozen food, chilled food or extra drinks.
This built-in appliance suits larger RV and caravan kitchens where maximum storage is the priority. An internal circulation fan helps maintain an even cabinet temperature, while Bluetooth app control lets you monitor and change settings from a compatible smart device.
The MCMU250 uses a pre-fused 12V / 24V DC lead and has no built-in 240V AC input. Its reversible door can be rehung during installation. The selected ventilation method determines the required cavity height, so check the current installation diagram before modifying cabinetry.
Features
185L upper refrigerator and independently controlled 65L lower drawer
Drawer temperature range from -18°C to +18°C
Internal circulation fan for more even cabinet temperature
Bluetooth app control, Turbo mode and three-stage battery protection
Auto-dim or auto-off display and dual-colour interior LED light
Reversible door with dual-pin travel latch
Adjustable shelves and door storage with room for upright bottles
3 year warranty.
Specifications
Brand: myCOOLMAN
Gross capacity: 250L
Large compartment capacity: 185L
Drawer compartment capacity: 65L
Temperature range: -18°C to +18°C
Input voltage: 12/24V DC
Rated input power: 100W
Power consumption: 2.33Ah when tested at 12V DC with the small zone at -15°C, large zone at 5°C and ambient temperature at 25°C
Dimensions: 680mm deep x 520mm wide x 1647mm high; depth includes the doors
Weight: 62.4kg
Climate class: N/T (tropical)
Refrigerant: R600a, 50g
Power connection: Pre-fused cable at the upper rear
Recommended circuit protection: 20A at 12V or 10A at 24V
Installation tolerance: Minimum 20mm at the rear and 5mm at each side, with the required ventilation kept unobstructed
External-vent trim cavity: 530-535mm wide x 1650-1655mm high x minimum 629mm deep
Side-trim / internal-vent cavity: 530-535mm wide x 1742-1747mm high x minimum 629mm deep
Trim and ventilation kits are available separately
Drain outlet: Rear; connect the supplied drain hose and route it through the floor before fitting the fridge into the cavity
Supplied with ice box, drain hose, user manual and six mounting-hole covers; cabinet-fixing screw length must suit the installation
Initial use: Wait approximately 6 hours before use, then allow one hour after powering and setting the compartments to confirm that the appliance is cooling
