Hydrapro 10Ah Trailer Breakaway System with Installation Kit & BatteryCharge4

Description

A 12V emergency breakaway power system for trailers using electric-over-hydraulic brakes. If the trailer separates from the tow vehicle, removal of the pull pin supplies the EOH brake actuator from the integrated 10Ah battery so the trailer brakes can operate.

This Breakaway Install Charge package adds installation hardware and a BMPRO BatteryCharge4 mains charger, allowing the breakaway battery to be charged from 240V while the trailer is parked as well as maintained from a suitable 12V tow-vehicle charging circuit.

Features

• Built-in charging circuit maintains the breakaway battery from a suitable 12V tow-vehicle charging circuit
• Push-button LED battery tester indicates fully charged, recharge or charging status
• Suitable for single-, tandem- and tri-axle EOH trailer applications
• Included BatteryCharge4 provides selectable 0.9A, 3A or 4A mains charging
• 2 year warranty.

Specifications

• System voltage: 12V
• Battery: Integrated 10Ah lead-acid battery
• Application: Electric-over-hydraulic trailer brake systems
• Axle applications: Single, tandem and tri-axle trailers
• Package: Breakaway Install Charge
• Included: Breakaway unit with built-in charging circuit and LED battery tester, 10Ah battery, pull-pin switch, installation kit with red coil and carabiner, and BMPRO BatteryCharge4
• On-road charging source: Suitable 12V tow-vehicle charging circuit
• BatteryCharge4 input: 240V, 50Hz
• BatteryCharge4 output: Selectable 0.9A, 3A or 4A
• Function: Supplies emergency power to the EOH brake actuator when the pull pin is removed; does not replace the normal brake controller
• Regulatory role: Emergency breakaway component within the complete trailer braking system; overall ADR 38/05 compliance applies to the complete installation
• Quantity: 1 kit

Further Information

• View the related PDF: Breakaway Manual