Enerdrive MPPT Solar Charge Controller 12V / 24V / 40A

Description

The Enerdrive MPPT Solar Controllers adopt the advanced MPPT control algorithm. It can minimise the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from the solar array under any conditions; it can increase the ratio of energy utilisation in the solar system by 20% - 30% compared with the PWM charging method.

The Enerdrive MPPT Controllers have electronic overload protections which allow you to have a total PV array (ie panel output) that is greater than the 40A output capacity without damaging the controller. While some power may be un-utilised in perfect conditions, having a larger (oversized) PV array enables you to compensate for the reduced production on cloudy days and increases the amount of time the controller is fully utilised.

The Enerdrive MPPT Solar Controllers have a self-adaptive three-stage charging mode based on a digital control circuit, which can effectively prolong the lifespan of batteries and significantly improve system performance. It also has comprehensive electronic protection for overcharge, over-discharge, PV and battery reverse polarity. This controller can be widely used for RV, marine, remote off-grid monitoring and many other applications.

IP33 ingress protection and isolated RS485 design further improve the controller's reliability and meet different application requirements.

Features

• LCD display
• Advanced MPPT technology & ultra-fast tracking speed guarantees tracking efficiency up to 99.5%
• Maximum DC/DC transfer efficiency is as high as 98.6%.
• Advanced MPPT control algorithm to minimise the MPP loss rate and loss time
• Accurate recognition and tracking of multi-peaks maximum power point
• Wide MPP operating voltage range
• Support lead-acid and lithium batteries
• Real-time energy statistics function
• Automatic power reduction over temperature
• Multiple load work modes
• Comprehensive electronic protection
• IP33 ingress protection
• Comms port included for future applications
• 5 year warranty.

Specifications

• Manufacturer Part Number: EN43540
• Brand: Enerdrive
• Barcode: 9342616029107
• Voltage: 12/24 V
• Battery Voltage Range: 8 ~ 32 V
• Maximum Output: 40 A
• Maximum PV Open Circuit Voltage: 92 V
• MPPT Voltage Range: (Battery Voltage + 2 V) - 72 V
• Maximum PV Array Power Recommended: 600 W/12 V or 1200 W/24 V
• Maximum PV Array Power Allowed (Overdrive): 720 W/12 V or 1440 W/24 V
• Efficiency (Maximum): 98.60%
• IP Rating: IP33
• Dimensions (mm): 255 x 185 x 67.8 mm L x W x H
• Mounting Hole Dimensions (mm): 200 x 176 mm
• Mounting Hole Size: 5 mm
• Maximum Cable Size Accepted: 6 AWG (13.2 mm2)
• Recommended Cable Size: 6 AWG (13.2 mm2)
• Shipping Weight: 1.97 Kgs.
• Shipping Dimensions: 21 cm x 30 cm x 10 cm.

Further Information

• View the related PDF: Enerdrive MPPT Solar Charge Controller Manual

Video Guide

Community Photos