Enerdrive MPPT Solar Charge Controller 12V / 24V / 20A

Description

The Enerdrive MPPT Solar Controller adopts the advanced MPPT control algorithm. It can minimise the maximum power point loss rate and loss time, quickly track the maximum power point (MPP) of the PV array and obtain the maximum energy from the solar array under any conditions. It can increase the ratio of energy utilisation in the solar system by 20% - 30% compared with the PWM charging method.

The Enerdrive MPPT Controller has electronic overload protection which allows you to have a total PV array (ie panel output) that is greater than the 20 amp output capacity without damaging the controller. While some power may be unutilised in perfect conditions, having a larger (oversized) PV array enables you to compensate for reduced production on cloudy days and increases the amount of time the controller is fully utilised.

The Enerdrive MPPT Solar Controller has a self-adaptive three-stage charging mode based on a digital control circuit, which can effectively prolong the lifespan of batteries and significantly improve system performance. It also has comprehensive electronic protection for overcharge, over-discharge and PV & battery reverse polarity. This controller can be widely used for RV, marine, remote off-grid monitoring and many other applications.

IP33 ingress protection and isolated RS485 design further improve the controller's reliability and meet different application requirements.

Features

• LCD display
• Advanced MPPT technology & ultra-fast tracking speed guarantees tracking efficiency up to 99.5%
• Maximum DC/DC transfer efficiency is as high as 98.6%.
• Advanced MPPT control algorithm to minimise the MPP loss rate and loss time
• Accurate recognition and tracking of multi-peak maximum power point
• Wide MPP operating voltage range
• Support lead-acid and lithium batteries
• Real-time energy statistics function
• Automatic power reduction at high temperature
• Multiple load work modes
• Comprehensive electronic protection
• IP33 ingress protection
• Comms port included for future applications
• 5 year warranty.

Specifications

• Manufacturer Part Number: EN43520
• Brand: Enerdrive
• Barcode: 9342616029084
• Voltage: 12/24 V
• Battery Voltage Range: 8 ~ 32 V
• Maximum Output: 20 A
• Maximum PV Open Circuit Voltage: 92 V
• MPPT Voltage Range: (Battery voltage + 2 V) - 72 V
• Maximum PV Array Power Recommended: 300 W/12 V or 600 W/24 V
• Maximum PV Array Power Allowed (Overdrive): 360 W/12 V or 720 W/24 V
• Efficiency (Maximum): 98.30%
• IP Rating: IP33
• Dimensions (mm) L x W x H: 217 x 158 x 56.5
• Mounting Hole Dimensions (mm): 160 x 149
• Mounting Hole Size: 5 mm
• Maximum Cable Size Accepted: 10 AWG (6 mm2)
• Recommended Cable Size: 10 AWG (6 mm2)
• Shipping Weight: 1.12 Kgs.
• Shipping Dimensions: 8 cm x 24 cm x 18 cm.

Further Information

• View the related PDF: Enerdrive MPPT Solar Charge Controller Manual

Video Guide