AL-KO Electric Brake Hub Drum 10 inch / HT Holden 5-Stud · Suits LM Bearings

Description

Brake hub drum - HT Holden, suits 250 mm ALKO electric brake assembly. Photo is representative only; numbers and position of studs vary. Price is for one side only. They fit either left or right.

The HT Holden wheel pattern does not determine the bearing type. This hub drum accepts either standard LM (Holden) or Slimline (Ford) bearings with the matching cups and seal for the axle's machined journals. When changing bearing type, fit the corresponding cups as well as the bearing cones; do not mix LM and Slimline components.

When replacing a drum on AL-KO electric brakes, AL-KO recommends fitting a new brake magnet at the same time.

Features

• 1 year warranty.

Specifications

• Manufacturer Part Number: 428200
• Brand: AL-KO
• Electric brake hub drum: 250 mm nominal (10 inch x 2-1/4 inch)
• Wheel pattern: HT Holden, 5 studs on a 107.95 mm pitch circle diameter (PCD)
• LM bearing configuration: 31.75 mm inner and 19.05 mm outer axle bearing journals
• Slimline bearing configuration: 35 mm inner and 22 mm outer axle bearing journals
• AL-KO hub-drum maximum axle capacity: 1000 kg with LM bearings or 1450 kg with Slimline bearings; the complete axle, brake and wheel ratings also apply
• Supplied quantity: 1 hub drum with wheel studs
• Bearings sold separately
• Wheel nuts sold separately
• Shipping Weight: 10.94 Kgs.
• Shipping Dimensions: 12 cm x 30 cm x 30 cm.