Trailer Valet XL Customer Service and Technical Staff Manual

Product Overview

The Trailer Valet XL is a high-strength steel trailer dolly with a powder coat finish designed to resist corrosion from elements and marine use. It is engineered for maneuvering trailers up to 10,000 lbs with ease on paved surfaces or compacted gravel and soils free of debris.

Specifications

• Wheel Size: 9.25 inches
• Tongue Max Weight: 1,000 lbs
• Trailer Max Weight: 10,000 lbs
• Weight of Unit: 55 lbs
• Maximum Dimensions: 29” H x 13” L x 7.5”

Safety Warnings

• Do not use on slopes and inclines beyond stated limits.
• Ensure brakes are set before leaving the trailer.
• Do not submerge in water or use in muddy terrain.
• Use only on solid surfaces for traction.
• Do not use the drill on the Trailer Valet’s high gear.
• Always check for damaged parts before use.
• Designed for vertical loading; avoid excessive side forces.
• Have wheel blocks in place before/after use.

Assembly Instructions

1. Setup: Unbox and prepare the components. If the Coupling Plate is not installed, secure it with the Locking Nut.
2. Adjusting Trailer Height: Ensure the trailer tongue is about 14 inches off the ground.
3. Attaching the Ball to Coupler: Secure the ball with the coupler latch and tighten the Locking Nut against the coupler.

Alternative Method for Ball Attachment

For heavier trailers, insert the ball into the trailer coupler, lock it, and then secure the Locking Nut before lowering the trailer onto the Trailer Valet XL.

Operating Instructions

1. Testing Assembly: Ensure the trailer is supported by the Trailer Valet with the existing jack above ground.
2. Attaching Driver: Choose between manual operation with the Drive Handle or using the Drill Adapter for power operation.
3. Operating the Device: Ensure trailer brakes are disengaged, grip the brake and drill/driver firmly, and lift the Steering Handle to move the trailer.
4. Removing the Device: Detach the drill/drive handle, lower the jack, and release the Locking Nut and coupler latch.

Maintenance

• Before First Use and Regularly: Inspect for damage, ensure Locking Nut is tight, and keep the device free from contaminants.
• Every 90 Days: Apply multipurpose grease to the chain and gear bushings.
• After Marine Use: Rinse with fresh water and dry. Do not submerge.

Warranty

• Duration: 1 year from purchase date, covering manufacturing defects when used as directed.
• Exclusions: Normal wear, consumable parts, cosmetic damage, damage from misuse, improper installation, or unauthorized repairs.
• Customer Responsibilities: Provide proof of purchase and follow warranty claim instructions.

Customer Support

For assistance, troubleshooting, or warranty claims, contact Customer Service without providing direct contact details.

This manual is intended to provide comprehensive technical and operational information for customer service and technical staff handling inquiries about the Trailer Valet XL. Always refer to this document for guidance on product specifications, safety warnings, assembly, operation, maintenance, and warranty information.