Trail-A-Mate Hydraulic Jockey Wheel & Jack - 1000kg

Description

The Trail-A-Mate hydraulic jockey wheel / jack has been specifically designed for use with caravans, trailers and horse-floats. The clever design quickly and easily converts from a jockey wheel to hydraulic jack by simply swapping the wheel to the included solid baseplate.

The Trail-A-Mate has a lifting capacity of 1000kg making it suitable for jacking Caravans or Trailers up to 2900kg ATM. It suits standard 50mm clamps making it a straight swap for your existing jockey wheel and has 4 positions for the clamp on the 500mm outer shaft - plus the lift height of 380mm.

Instructions

Instructions for safe use for caravan/trailer jacks:

The jack should be used on level firm ground wherever possible.

It is recommended that the wheels of the caravan/trailer be chocked.

No person should remain in a caravan/trailer supported by a jack.

No person should place any portion of his or her body under a caravan/trailer supported by a jack.

The caravan/trailer should be attached to the towing vehicle.

Features

Includes:

Base plate

Lifting clamp

Jacking bracket

Jacking handle

Wheel only

Extendable wheel brace

Built in safety lock

1 year warranty.

Specifications

Model: 000417 CAMEC, 450-00060 Coast to Coast, HW-HW011

Brand: Trail-A-Mate

1000kg safe working load

Suit standard height and off-road models

4 positions for the clamp on the 500mm outer shaft - plus the lift height of 380mm

Suits standard 50mm clamps

Shipping Weight: 14.99 Kgs.

Shipping Dimensions: 74 cm x 16 cm x 16 cm.

Our Comments

It has 4 positions for you to clamp to on the mast. With the wheel on, from the bottom of the wheel to the first notch is 280mm, then 370mm, 460mm, to 550mm on the top notch. It can then be jacked up an additional 380mm between the bottom notch and the bottom of the wheel.

Jockey Wheels - Key Feature Guide

Not all jockey wheels are created equal, this guide explains the key difference across our complete range....

Read