Telescopic Table Leg, With Gas Strut

Description

Telescopic table leg, Gas strut. This can be placed at your desired height on the 480mm lower tube.

The inner tube is released and clamped with the black knob. This allows the inner tube to raise up a maximum of an additional 375mm.

Ideal for use where the table drops to make a bed. Additional support may be required for table edges when used as a bed.

Features

The larger outer tube is semi-permanently clamped into position with the lower nut. The central gas strut assists the lift.

This is usually recessed into the floor to provide the lowest possible height.

Does not include a laminex top.

1 year warranty.

Specifications

Model: 007890 Camec, 10510270

The top metal plate is 220mm square, as is the base plate.

Full Extend 883mm.

Bottom plate is adjustable down to around 15mm.

Shipping Weight: 4.94 Kgs.

Shipping Dimensions: 20 cm x 20 cm x 49 cm.

Our Comments

45mm shaft where the table plate is welded to.