Breakaway system includes battery case, 5AMP hour battery and breakaway switch. This unit will activate the electric brakes on the towed caravan or trailer in the event that it becomes separated from the tow vehicle. Expect about 4 years from included battery.
This is the most basic of Breakaway systems. It will engage brakes if the towed trailer/caravan get disconnected. The battery cannot be recharged in place and does not have a charge display. It cannot be connected to a battery monitor inside the tow vehicle, as required for NSW registration.
Mount Battery Case securely to
frame, jack post or other suitable
location on trailer with Breakaway
Switch Cable towards tow vehicle.
WARNING Switch location
should be selected to ensure
unobstructed line of pull in
event of vehicle separation.
Bolt breakaway switch bracket
to frame of trailer or battery case
bracket using 1/4 bolt and lock nut
or (2) 1/4 jam nuts. (Bolt and nuts
not included in kit.)
WARNING Do not over tighten bolt.
Switch must be able to pivot.
Check and install battery.
Wire as per schematic. Properly
insulate all connections.
Attaching to tow vehicle: Attach
Breakaway Switch Cable to tow
vehicle frame being certain the
cable does not drag on the ground
and no strain or restriction is placed
on the cable.
WARNING Do not hook cable
to safety chain loop or hitch ball.
FeaturesCase will clamp onto A-Frame
For Replacement 5ah batteries see ID-14073 1 year warranty.
SpecificationsModel: 350-01260 Coast to Coast, 000939 CAMECBrand: Tekonsha12 Volt
5amp / hour battery included (rechargeable)
breakaway switch included
Does Not Include Charger.
Does NOT meet NSW requirements, as it cannot be connected to a remote monitor in tow vehicle Shipping Weight: 2.17 Kgs.Shipping Dimensions: 16 cm x 17 cm x 22 cm.
Our CommentsPlease note we are only able to source the 20005 model. This model does NOT include the charger. The instructions available from this page in .PDF format are generic, and are included with each kit from the manufacturer.