Spare Wheel Carrier Bolt On. The flat base includes 2 x 125mm u-bolts which cover up to 100mm of bumper thickness. If using on an A-frame the wheel will be inline or at 90 degrees to the A-Frame. These are not recommended for LARGE 4WD wheels.
- Model: 000512 CAMEC, 0061-101, 30615100
- The upright is 395mm from the bumper top, to the centreline of the wheel mount
- The Wheel backing plate is 160mm offset from the centreline of the upright
- It has 20mm centre mounting bolt with provision to accept a padlock
- single locating pin that fits thru one wheel stud hole (any stud pattern).
- The steel profile is 65mm x 35mm.
- Shipping Weight: 4.47 Kgs.
- Shipping Dimensions: 30 cm x 50 cm x 15 cm.