Dometic Saneo® Cassette Toilet Installation and Operation Manual

For Customer Service and Technical Staff

Safety Precautions

• Installation must be performed by trained personnel.
• Avoid using cleaning agents containing chlorine or alcohol.
• Do not violently shake the cassette tank.
• Ensure all components are installed in areas protected from frost to prevent damage.
• Avoid using anti-freeze agents as they can damage the sanitation system.
• The operating pressure for the magnet valve must not exceed 6 bar to prevent damage.

Model Identification

• Models include Saneo®B, Saneo®BS, Saneo®C, Saneo®CS, Saneo®BLP, Saneo®BW, Saneo®CLP, and Saneo®CW.
• Model variations:
  • S: Free-standing without flush water tank, with console.
  • W: Free-standing with integrated flush water tank.
  • LP: Low Profile, low console.
  • B: Basic with plastic bowl.
  • C: Comfort with ceramic bowl.

Technical Data

• Supply voltage: 12 V DC.
• Current consumption: Max. 2 A with internal water pump, max. 10 A with external pump.
• Operating temperature: 0°C to +50°C.
• Cassette tank capacity: 16 liters.
• Fresh water tank capacity (optional): 7 liters.
• Required pump output at the toilet inlet: Min. 5.5 l/min, max. 12 l/min (recommended 7-8 l/min).

Installation Instructions

1. Service Door Installation: Follow the instructions provided with the Dometic Seitz SK 5 service door (if applicable).
2. Wall Apertures:
   • For the service door: Dimensions depend on orientation (vertical or horizontal).
   • For the flap (Saneo BW and CW models): Use the provided template.
3. Toilet Installation:
   • Ensure installation allows for maintenance access and is in a frost-protected area.
   • Maintain at least 60 mm clearance from side walls for swiveling of the toilet top part.
   • Specific installation steps vary by model. Refer to the detailed instructions for each model type (Saneo B, C, BW, CW, BS, CS, BLP, CLP).
4. Water Connection:
   • Use a smooth tube connection. The connection sleeve is not included.
   • For Saneo xW models with an integrated water tank, follow specific instructions.
   • Check for leak tightness after connection.
5. Flap Installation (Saneo BW and CW models): Apply sealing compound and fasten with screws.
6. Electric Connection:
   • Connect to a suitable power supply via the main connection block of the vehicle.
   • Do not connect in parallel with other consumers.
   • Circuit diagrams are provided for models with integrated and external water pumps.

Troubleshooting

• Ensure all connections are secure and leak-free.
• Verify the operating pressure for the magnet valve does not exceed 6 bar.
• Check for blockages in the water supply if the flush function is impaired.
• For electrical issues, ensure the toilet is correctly connected to the power supply and not in parallel with other electrical consumers.

Maintenance

• Regularly clean the toilet with suitable non-chlorine, non-alcohol-based cleaning agents.
• Inspect and clean the cassette tank regularly.
• Check all seals and connections periodically for signs of wear or leaks.

Warranty and Support

• Warranty conditions are in accordance with EC Directive 44/1999/CE. Malfunctions due to improper use or modifications are not covered.
• For warranty or maintenance support, contact the Dometic customer services department without including specific contact details.

This manual serves as a comprehensive guide for customer service and technical staff in installing, operating, and troubleshooting Dometic Saneo® Cassette Toilets.