RV Media LCD TV Bracket Installation and Operation Guide

For Customer Service and Technical Staff

Installation Overview

Mounting to the Wall:

Preparation:

• Ensure the wall or mounting surface can support the combined weight of the mount and TV (up to 15 kg or 33 lbs). Reinforce the structure if necessary.
• Use a level (integrated bubble level on the wall plate) to position the wall plate against the wall. Mark two locations for drilling.
• Drill a 3 mm (1/8”) pilot hole at each marked location.

Securing the Wall Plate:

• Place the wall plate back against the wall and secure it with the provided screws (A), ensuring it remains level.

Attaching the Mount to the TV:

Selecting Screws:

• For flat-back TVs, use M4 x 12 screws (B).
• For curved or recessed-back TVs, use M4 x 20 screws (C) and possibly spacers (D).

Mount Attachment:

• Attach the mount to the TV using the identified screws. Use spacers (D) if necessary for curved or recessed backs.

Combining TV and Arm:

• Slide the mount with the TV onto the TV bracket arm. Secure with set screws (E) on either side to prevent sliding.

Final Assembly:

• Slide the bracket with the TV into the wall plate until it clicks. Ensure it's securely in place before releasing.
• Push the plastic tab at the top of the wall plate to slide the mount upwards and out.

Operation and Adjustment

• Adjust tilt angle or rotate the screen by carefully moving the TV into position. Use the S4 Allen key (F) to adjust tightness.
• Move the TV to the desired position. Adjust swivel joints with the S4 Allen key (F) if too tight or loose.
• Clean with a dry cloth. Regularly inspect and retighten screws and hardware.

Locking Mechanism

• Remove the TV from the wall bracket during transit to avoid vibrations.
• Push the arm(s) to one side, align the white guides, and slide the locking pin through to secure.

Cable Management

Route cables through the hook at the bottom of the wall plate and along the TV bracket arm, securing them with plastic clips.

Specifications

• TV Size: Up to 24”
• Maximum Load: 15 kg (33 lbs)
• Mounting Pattern: 75 mm x 75 mm or 100 mm x 100 mm
• Tilt Range: Up to 14° in all directions
• Pan/Swivel Range: Up to 180°
• Horizontal Rotation: 360°
• Models/Max Reach: 1 Arm 255mm, 2 Arm 400mm, 3 Arm 545mm

Tools and Hardware Required

• Phillips Head Screwdriver
• Electric or Portable Drill
• 3 mm (1/8”) Drill Bit
• Wood Screw (x4), M4 x 12 Screw (x4), M4 x 20 Screw (x4), Spacer (x4), Set screws (x2), S4 Allen Key (x1)

Box Contents

• Mount (x1), Wall Plate (x2), Hardware Kit (x1), Instruction Manual (x1)

Important Notes

• Always ensure the mount is secured to a suitable surface.
• Use the set screw to prevent the mount from moving or rattling.
• Regularly inspect the locking mechanism and adjust as needed.

This guide is intended for use by customer service and technical staff to assist with installation, operation, and troubleshooting of the RV Media LCD TV Bracket.