Stock Update - 27th Jan 2021
Sorry, this item is not in our warehouse. We usually have at least 15 of these on our shelves but they have just been sold.
We already have another 40 on order with our supplier. 5 of the new ones are already allocated to other people who have placed orders with us.
We should have these again before any other shops, so if you find this product elsewhere we recommend you confirm they physically have it.
The supplier has told us to expect arrival around 25th of January.
Please place an order to reserve the next arrivals.
Description
Windout windows comes standard with standard FLY SCREENS. These can be easily replaced as shown below.
The bottom corners may be round or square depending on your existing screen. Check screen NOT the window.
The size in the title is the window size, the actual screen size is shown in Specifications below. Typically the screen is 20mm less that the quoted window size.
Installation
These can be replaced by fully opening the window, placing a butter knife under a rubber edge (from outside the RV) and peeling off. Take care near the centre at the top as this is where the join is.
It is best to the soak the new screen in a bucket of warm water and start the installation at the top corners - it just presses onto the lip. You may need to use a flat screw driver to run along the top edge if your fingers will not fit in the gap.
Features
- This quality product is Made in Australia.
- 1 year warranty.
Specifications
- Model: 010235, 6816-505, 50510110
- Screen Measures 260mm high x 742mm wide
- Shipping Weight: 100 grams.
- Shipping Dimensions: 20 cm x 30 cm x 5 cm.