Dometic Cooktops PI8022, PI8023 - Customer Service and Technical Staff Manual

General Safety Instructions

• Warning: Only qualified personnel should repair the device. Unauthorized modifications are prohibited. Ensure compatibility with gas type and pressure as specified in the "Technical Data" section.
• Caution: In case of safety glass cover breakage, immediately shut off all burners, isolate the device from the power supply, and do not touch the device surface.
• Ensure proper ventilation as per AS/NZS 5601 and local regulations.
• Keep flammable materials away from the device.
• Use the device only at the specified pressure and with the correct gas type (propane or butane).

Installation Instructions

Selecting the Installation Location

• Maintain minimum distances of 500 mm above and 200 mm to the sides from combustible materials.
• Avoid drafts at the installation location.

Installing the Device

• Installation must be done by licensed gasfitters.
• Create a cutout in the worktop as per the provided dimensions for PI8022 or PI8023.
• Secure the device using the provided screws.
• Ensure no stress is placed on the gas line.

Connecting to Gas Supply

• Use only certified propane or butane gas cylinders with a certified pressure reduction valve.
• Use a rigid metal pipe for the gas connection.
• Check all connections for leaks using leak spray or soapy water.

Connecting to Power Supply (PI8023 Only)

• Connect as shown in the manual, with a 1 A fuse in the plus line near the battery.

Testing the Device

• Test all burners for correct operation, flame stability, and flame failure protection.

Operating Instructions

Igniting a Burner

• Ensure visibility of the ignition process.
• Select pots according to the burner size for optimal safety and efficiency.

Switching Off the Device

• Turn the knob to the zero setting to switch off the device.

Replacing the Gas Cylinder

• Replace the gas cylinder in a well-ventilated area, ensuring no sources of ignition are nearby.

Cleaning and Maintenance

• Let the device cool down before cleaning.
• Use standard commercial cleaning agents without sharp or hard objects.
• Annually check the device for proper function and perform necessary repairs.

Troubleshooting

• No spark when igniting: Check power connection and sparker cable.
• Burner not lighting: Ensure gas supply is on and burner ports are clean.
• Uneven flame or flame lifting: Clean or adjust burner ports.
• For issues with flame size or gas supply, consult an authorized service representative.

Technical Data

• Gas category: ULPG
• Gas connecting pressure: 2.75 kPa
• Connection voltage (PI8023): 12 V (1 A fuse)
• Burner specifications vary between models PI8022 and PI8023.

Warranty

• The warranty period is 3 years. Include a copy of the receipt and a description of the fault when seeking warranty service.
• For Australia: Complies with Australian Consumer Law.
• For New Zealand: Complies with the Consumer Guarantees Act 1993(NZ).

Disposal

• Dispose of the product and packaging material in accordance with local recycling regulations.

This manual is intended to assist customer service and technical staff in providing accurate and comprehensive support for the Dometic PI8022 and PI8023 cooktops.