Roof Windows User & Installation Manual - Model: 400x400 Manual Opening

Contents:

• Main Components
• Security Considerations
• Roof Window Use
• Installation
• Product Size
• Packing List
• Install Instructions
• Warranty Regulations

Main Components:

• Dome (Acrylic)
• Push Rod Arm
• Push Rod
• Upper Frame
• Ambient Light (Note: Models without ambient lights do not have a power button)
• Blind Frame
• Installation Frame
• Latch Hook
• Damping Block
• Pleated Blind
• Pleated Flyscreen

Security Considerations:

• Warning: Ensure the ambient light is connected to a DC12V power supply and correctly connected to prevent damage or fire.
• Warning: Lock the dome before driving to prevent damage to the acrylic.
• Attention: Close the dome on rainy days or open to ventilated gear, and ensure it is closed when driving.
• Attention: The push rod can withstand a maximum pull-down force of 30kg. Do not hang heavy objects on it.
• Attention: Ensure the push rod is fully locked by pulling it down until it clicks into place.
• Attention: Regularly check the roof window for damage, such as tension cracks in the acrylic glass.
• Attention: Do not open the window in strong wind or rain. Keep the roof window free of snow and ice.

Roof Window Use:

• Ambient Light Control: Touch the power button to cycle through light settings (Low, Medium, High, Standby).
• Opening the Dome: Push the push rod up to unlock and slide toward the front of the car to set at 5° semi-ventilated or 50° fully-ventilated gear.
• Closing the Dome: Slide the push rod along the track until it clicks into the locked position. Ensure both sides are locked before driving.

Product Size:

• Dimensions: 485mm x 410mm
• Roof mounting dimensions: 119mm x 180mm x 400mm x 400mm
• Hole size required: 485mm x 402mm

Packing List:

• Roof window
• ST4.0x16 Phillips pan head screws
• ST3.9x32 Phillips pan head screws
• U-shaped clips
• Plugs
• 4mm nylon cable tie

Installation Instructions:

1. Cut the installation hole on the roof according to the provided dimensions. Ensure a solid wall of at least 30mm width around the opening for screw placement.
2. Position the mounting frame according to the reserved position of the power cord and fix it using ST4.0*16 self-tapping screws.
3. Connect the reserved cord to the touch panel power cord and secure excess cord with a cable tie.
4. Apply sealant in the glue groove of the upper frame.
5. Clean the roof mounting surface, install the upper part of the skylight into the hole, and secure with ST3.9*32 self-tapping screws.
6. Clamp the U-shaped clips onto the fins of the blind frame and ensure it is tightly attached to the installation frame.
7. Test the functionality of lights, blind/flyscreen, and top cover.

Warranty Regulations:

• Duration: 12 months from the date of purchase.
• Coverage: Defects in materials and workmanship, with specific provisions for vinyl fabric and hardware components.
• Claim Process: Contact Aussie Traveller within 7 days of noticing a defect. Provide necessary documentation and photos.
• Exclusions: Damage from improper use, modifications without consent, environmental conditions, accidents, or normal wear and tear.

For further assistance or to make a warranty claim, contact Aussie Traveller directly.