PDF Product Manual

Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.

Product Manual

Print or Save

Customer Service and Technical Staff Reference Document for RAESOL 3-Way Absorption Refrigerator

1. Brief Introduction

Ensure the installation of this refrigerator is carried out by an experienced technician, who adheres strictly to local laws and regulations. Correct installation and usage are essential to ensure safety and reliability. Follow all instructions in this manual accurately.

2. Symbols Description

DANGER: Alerts to personal injury hazards. Follow all safety messages to avoid injury or death.
WARNINGS: Indicates potential for fatal or serious injury.
NOTICE: May cause damage to the refrigerator or impair performance.
NOTE: Provides supplementary operational information.

3. Safety Instructions

Installation and Operation Warnings

Follow all manufacturer's instructions strictly.
Installation must adhere to local regulations.
The cooling unit must not be tampered with due to high-pressure risks.
Gas and electrical connections should only be conducted by qualified professionals.
Ensure correct ventilation and sealing to prevent gas leaks.
Avoid using this appliance in rain or with flammable substances nearby.
Regularly check for gas leaks and ensure pipes are not under strain.
Ignition issues may occur over 1000 meters altitude; switch to alternative power modes.
Use only LNG gas; butane or propane are not suitable.

Children and General Safety

Children aged 3-8 must not operate the refrigerator.
Ensure appliances are not exposed to water, and cords are not damaged or trapped.
Heavy items should be stored at the bottom or door compartments to prevent tipping.

Maintenance and Winter Applications

Apply vent covers in temperatures below 10 degrees C for optimal performance.

4. Main Parts

Freezer compartment
Door lock
Operation panel
Refrigerator compartment
Evaporating aluminum
Door shelf
Storage shelf

5. Installation

Dimensions

Refrigerator: H754 x W510 x D597 mm
Cabinet: H768 x W520 x D590 mm
Minimum Ventilation Height: 813 mm

Sealing

Use 15mm sealing strips on the cabinet floor and 10mm strips on sides and top to prevent gas flow into living areas.

Fixing

Secure the refrigerator with four screws, ensuring door access and sealing integrity.

Draining Pipe

Either drill a hole through the vehicle floor or use the bottom vent grid for pipe installation.

Power Connections

Gas Connection

Must be handled by professionals, include a 2.75 kPa pressure regulator.

DC12V Connection

Use appropriate copper wires; ensure safety extra low voltage.

AC Connection

Insert AUS standard AC plug into socket; earthing pin must remain intact.

Vent Installation

Maintain a 15 mm to 25 mm distance from the rear wall; proper venting is mandatory to ensure safety and performance.

6. Operation

Control Panel Overview

Indicators for DC mode, AC mode, Auto mode, Gas mode, Check, and Temperature.

Energy Mode Selection

Use ON/OFF, DC/AC, and AUTO/GAS buttons to select energy sources. AUTO mode selects between AC or Gas inputs.

Cooling Performance

Adjust using the temperature indicator; one light for minimum, five for maximum cooling capacity.

Shelf and Door Shelf Relocation

Follow specified procedures for removing and repositioning shelves as per requirement.

7. Notes on Storing Food

Recommended storage for different types of food is specified.
Avoid keeping carbonated drinks in the freezer compartment.
Follow general food storage guidelines to ensure food safety and appliance efficiency.