PDF Product Manual
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
Kit Extension Vent 28 F Fixing Kit - Technical and Customer Service Guide
Product Overview
The Kit Extension Vent 28 F Fixing Kit is designed for secure and efficient installation of vent systems. This guide provides detailed information on the components, installation procedures, and troubleshooting for customer service and technical staff.
Kit Components
Fixing Kit Part Numbers:
- Main Kit: 98683-145
- Alternative Kit: 98683-140
Included Components:
- Screws (+): 4 pcs.
- Nuts (-): 4 pcs.
- Washers (ae): 4 pcs.
- Spacers (2g): 4 pcs.
Color Options:
- White: 98683-141, 98683-144 (4 pcs.)
- Crystal: 98683-136
Additional Components:
- Sealant Strip: 98683-139
- Instruction Manual: Part 137
Installation Procedure
Preparation:
Ensure the vent area is clean, dry, and free of debris.
Identify the correct placement for the vent based on the vehicle's layout.
Mounting the Vent:
Place the vent in the designated area.
Use the screws (+) and washers (ae) to secure the vent's base into place.
Apply the sealant strip (98683-139) around the edge of the vent to ensure a watertight seal.
Attaching Components:
Utilize the spacers (2g) between the vent and the vehicle's surface if required for proper alignment.
Secure the assembly with nuts (-) on the interior side to ensure a tight fit.
Finalizing Installation:
Check all components for secure fitting.
Clean any excess sealant for a neat finish.
Follow the instruction manual (Part 137) for any specific details related to your vent model.
Troubleshooting
Loose Components:
Ensure all screws, nuts, and washers are tightly secured. Check for any missing pieces and replace if necessary.
Leakage:
Reapply or replace the sealant strip (98683-139) around the vent. Ensure the vent is properly aligned and sealed against the vehicle's surface.
Component Damage:
Inspect all parts for damage before installation. Replace any damaged components as needed.
Product Features
- Versatility: Available in white and crystal color options to match various vehicle designs.
- Durability: Designed for long-lasting use in outdoor conditions.
- Ease of Installation: Comes with all necessary components for a straightforward installation process.
Specifications
Dimensions: Specific dimensions are based on the vent model being installed. Refer to the instruction manual (Part 137) for detailed measurements.
Material: High-quality materials designed for durability and weather resistance.
Additional Information
For more detailed information on installation, component specifications, or troubleshooting, refer to the instruction manual (Part 137) included in the kit. This guide serves as a comprehensive resource for customer service and technical staff to assist with product inquiries and support.
Note: This document is intended for internal use by customer service and technical staff. It compiles essential information from the original product documentation to support product inquiries and troubleshooting effectively.