PDF Product Manual (1MB)
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
VENT 28 F Rooflight Installation and Usage Guide for Customer Service and Technical Staff
Product Overview
- Models: VENT 28 F White (07902-01-), VENT 28 F Crystal (07902-01B)
- Weight: 1.8 kg for both models
- Dimensions: Designed for a square hole of 28cm. Compatible with roof thicknesses between 28mm and 60mm.
- Maximum Permitted Speed with Rooflight Installed: 130 km/h
Package Contents
- Rooflight unit
- Mounting screws: Ø3,5x30 mm (for roof thickness 28-40mm), Ø3,5x50 mm (for roof thickness 40-60mm)
- Mosquito net frame
- Special pressure hooks for mosquito net frame installation
Installation Instructions
- Preparation: Ensure the roof's internal and external surfaces are flat and that the installation location does not interfere with adjacent accessories.
- Cutting the Hole: Make a square hole of 28cm on the chosen spot on the roof.
- Sealing: Apply sealant (recommended: SIKALASTOMER-710/THEROSTAT II) on the lower part of the external frame, following the appropriate rails, with a minimum width of 10 mm.
- Positioning: Place the external frame in the opening, ensuring the hinges face the front of the vehicle.
- Securing the Frame: Use the provided screws to fix the frame, choosing the size based on the roof's thickness. Tighten the screws to ensure the frame adheres to the roof without deforming it.
- Mosquito Net Frame: Install the mosquito net frame using the special pressure hooks.
- Final Touches: Remove the protective plastic from the cover. Avoid prolonged exposure to sunlight during this step to prevent difficulty in removing the plastic.
Safety and Maintenance Instructions
- General Safety: Check all screws for tightness periodically, especially after the first few kilometers post-installation and before/after long trips. If the opening-closing device hardens, lubricate with a few drops of grease. Walking on the product cover is prohibited. Always ensure the rooflight is properly closed before driving.
- Cleaning: Use only neutral, non-aggressive detergents for cleaning both the internal and external parts of the rooflight. For the Crystal cover, use an acrylic glass cleaner with a soft cloth to avoid scratches. Never use aggressive cleaning products, alcohol-containing detergents, solvents, or any corrosive liquid. The mosquito net can be cleaned with water and a neutral detergent after removing it from the press fittings.
Warranty
Fiamma provides a warranty for defects related to materials and manufacturing, subject to local laws and regulations of the country where the product was purchased.
Accessories
- KIT-TURBO-VENT 28 F: Item No. 07903-01-
- SPOILER UNIVERSAL: Item No. 06289-01-
Important Notes
Fiamma S.p.A. reserves the right to modify, without notice, prices, materials, specifications, models, or to cease production of any model.
For any issues or further information, customers should contact their local dealer, providing the data on the nameplate. Spare parts drawings are available on the Fiamma website.
This guide is intended to assist customer service and technical staff in providing accurate and comprehensive support for the VENT 28 F Rooflight.