PDF Product Manual (3.8mb)
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
CARRY-BIKE PRO C / PRO C N User Manual for Customer Service and Technical Staff
Product Overview:
Models: CARRY-BIKE PRO C / PRO C N
Model Numbers: 02096-10-, 02096-10V, 02096-10A, 02096V10A
Type: Bicycle carrier for motorhomes
Specifications:
Package Contents:
Mounting brackets and hardware
Installation and usage instructions
Safety and warranty information
Installation Instructions:
Pre-Installation Check:
Mounting the Brackets:
Use provided screws and bolts (M6, M6x55, M6x60, M6x65, M6x50, M6x95).
Ensure brackets are securely fixed, maintaining a minimum distance of 40 cm and a maximum of 80 cm between them.
Attaching the Rails:
Cut the tubes (A) to desired vertical spacing.
Attach rails using provided fixtures (L, V, F, T, E, U, H, G).
Final Assembly:
Usage Instructions:
Load bicycles starting from nearest to the vehicle wall to ensure even weight distribution.
Secure bicycles firmly using the bike blocks and straps provided.
Check the installation for any loose parts or misalignments regularly, especially after the first use and after long trips.
Safety Instructions:
Do not exceed the maximum load capacity of 60 kg.
Ensure the vehicle’s rear axle can handle the additional load without exceeding permissible axle load.
Use additional rear-view mirrors if the bike carrier obstructs the vehicle’s rear view.
Always use the provided safety signs to indicate the presence of an extended load.
Troubleshooting:
Loose Components:
Tighten all connections and replace any worn-out parts.
Noise or Vibration:
Check that all bikes are securely mounted and that no parts of the rack are making contact with the vehicle.
Difficulty in Mounting:
Ensure that the brackets are fixed at the recommended points and that the vehicle wall is capable of supporting the load.
Warranty:
Fiamma provides a warranty covering defects in materials and manufacturing under the conditions set by local laws where the product was purchased.
Maintenance:
Regularly check and tighten all mounting points.
Inspect straps and rubber components for wear and tear; replace if necessary.
Remove batteries from electric bikes before mounting to reduce weight and prevent movement during travel.
Additional Accessories:
Rail Plus / XL, Rail Premium / XL, Bike-Block Pro S, Bike Frame Adapter, Plastic and ALU Signals, Cable-Lock.
Important Notes:
Contact and Support:
For any issues or further instructions, refer to the detailed diagrams and parts lists available on the manufacturer’s website. Ensure to have the product model and item number ready when seeking support.
This manual is intended to provide comprehensive information to support customer service and technical staff in assisting users of the CARRY-BIKE PRO C / PRO C N. Always refer to the latest product updates and detailed guides available online.