FIAMMA F45s Awning Installation and Usage Guide for Customer Service and Technical Staff

Product Specifications:

Models and Dimensions:

• F45s 190: 185 cm width, 169 cm extension, 100 cm height, 11.5 Kg
• F45s 230: 231 cm width, 214 cm extension, 150 cm height, 16.5 Kg
• F45s 260: 263 cm width, 247 cm extension, 200 cm height, 19.5 Kg
• F45s 300: 308 cm width, 292 cm extension, 250 cm height, 23.0 Kg
• F45s 325: 323 cm width, 307 cm extension, 250 cm height, 23.0 Kg
• F45s 350: 348 cm width, 331 cm extension, 250 cm height, 24.0 Kg
• F45s 375: 375 cm width, 357 cm extension, 250 cm height, 26.0 Kg
• F45s 400: 398 cm width, 381 cm extension, 250 cm height, 27.0 Kg
• F45s 425: 423 cm width, 405 cm extension, 250 cm height, 28.2 Kg
• F45s 450: 448 cm width, 431 cm extension, 250 cm height, 29.5 Kg

Color Options:

• Polar White: 06280x01y
• Titanium: 06290x01y
• Deep Black: 06759x01y

Installation Instructions:

1. Preparation:

   Check for any damage or deformation from transport.
   Ensure all parts are present and undamaged.

2. Mounting the Awning:

   Awnings can be fixed using the brackets provided or specific adapters for different models.
   Align the "Support" text on the awning case with the brackets.
   Ensure brackets are well aligned to prevent issues. Use shims if necessary for alignment.
   Install the awning only on brackets that are perfectly aligned with the vehicle wall.
   The awning should be installed horizontally. Consider the position of gutters or roof edges.

3. Drilling and Fixing:

   Before drilling, probe the vehicle wall for reinforced points and ensure no internal obstacles like electrical cables or gas pipes.
   Mark the fixing points on the vehicle's outer wall, drill, and then fix the brackets.
   Do not overtighten the bracket blocking nuts. Use mastic around the holes to prevent water ingress.

4. Attaching the Awning:

   The brackets have two holes; use the most convenient one for fixing the awning with the provided screw.

Usage Instructions:

• Deploying the Awning:

  Pull out the legs about 1 m from the opening.
  Unhook and lower the leg, then fully unroll the awning and adjust the legs to the desired height.
  Secure the legs to the ground using the provided hooks to prevent lifting by wind.
  For additional security, use the Tie-Down accessory.

• Correct Placement of Leg Foot:

  Ensure the foot for the leg is correctly placed inside the housing of the lead bar to allow complete closure of the awning.

Safety and Maintenance:

Regularly check the awning for any signs of wear or damage.
Ensure all mounting points and brackets are secure and not loosened over time.
Clean the awning fabric regularly with suitable cleaners to maintain its appearance and longevity.

Troubleshooting:

If the awning does not fully retract, check the placement of the leg foot and ensure it is not obstructing the lead bar.
For any mechanical issues, refer to the detailed diagrams provided in the manual or contact technical support for guidance.

Note:

Installation should be performed by qualified personnel in accordance with local regulations.
For any doubts or questions concerning installation or use, contact technical support for assistance.

This guide is intended to provide comprehensive information to customer service and technical staff for effective support and troubleshooting of the FIAMMA F45s awning.