PDF Product Manual (2.4mb)
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
FanTastic Vent Customer Service and Technical Staff Manual
Table of Contents
- Product Overview
- Safety Instructions
- Installation Guide
- Operating Instructions
- Maintenance and Cleaning
- Troubleshooting
- Technical Specifications
- Warranty and Disposal
1. Product Overview
The FanTastic Vent is a roof light with an integrated fan, designed for installation in motor homes and caravans. It is intended to provide ventilation and light, enhancing the comfort of the vehicle's interior.
2. Safety Instructions
- WARNING: Disconnect the vehicle power supply before installation to avoid injury.
- Do not tread on the plastic dome.
- Ensure the roof light is closed and undamaged before starting your journey.
- Do not open while driving or in adverse weather conditions.
- The manufacturer is not liable for damage due to misuse or unauthorized alterations.
3. Installation Guide
Pre-Installation Checks
- Verify the roof thickness and ensure the installation location is near a 12 V connection.
- Ensure the installation area is flat and parallel, with a maximum inclination of 15°.
- The existing roof hole may be used if compatible.
Installation Steps
- Preparing the Hole: Ensure the dimensions are correct for the model (350 x 350 mm or 400 x 400 mm).
- Reinforcing Rails: If necessary, fit reinforcing rails to support the fan.
- Electrical Connection: Run a 12 V connection through the roof.
- Sealing: Apply a gasket or sealant around the roof opening.
- Positioning: Ensure the cover hood hinge faces the direction of travel.
- Securing: Fasten the fan using provided screws and seal the unit.
- Inner Frame Installation: Adjust and install the inner frame based on roof thickness.
4. Operating Instructions
- Model 7350, 7300: Use the remote control for operation. Features include temperature setting, fan speed adjustment, and rain sensor activation.
- Model 3300, 3350: Manual controls for fan speed, cover hood operation, and thermostat adjustment.
- Model 2250: Features a manual rotary control for fan speed and cover hood operation.
5. Maintenance and Cleaning
- Fuse Replacement: Replace with a 4 A fuse if necessary.
- Cleaning Fan Blades: Remove the grille and clean with non-abrasive detergent.
- Remote Control: Keep dry and clean, replace batteries as needed.
6. Troubleshooting
- If the fan does not operate, check the fuse and ensure the cover hood is open.
- For issues with the remote control, replace batteries and ensure it is within range.
7. Technical Specifications
- Voltage: 12 V
- Max Power Consumption: 30 W (7350), 36 W (2250 – 7300)
- Noise Level: < 40 dB(A)
- Dimensions: 471 x 471 x 190 mm
- Weight: 5 kg
8. Warranty and Disposal
- The statutory warranty period applies. Contact service partners for warranty claims.
- Dispose of the product according to local regulations. Packaging material should be recycled.
For further assistance or detailed instructions on specific models, refer to the model-specific sections of this manual.