Nothing in cart
Review of Caravans Plus Service
Product received was exactly what we needed and ordered. Priced below competitors and was received the next day to our regional address. Very impressed. Peta.
1st order by Peta from NSW
PDF Product Manual (1MB)
Below is a summary of the contents of this PDF. You can also view or save the original full PDF. The products that this PDF relate to are listed at the bottom.
Enerdrive True Sine Wave Inverters Technical and Customer Service Manual
Product Overview
Enerdrive ePOWER Inverters are designed to provide AC and 5V USB power for homes, boats, caravans, 4WDs, or commercial vehicles. They convert DC power from a battery into true sine wave AC power.
Models:
- EN1120X: 2000W 12V with AC Transfer & Safety Switch
- EN1120X-24V: 2000W 24V with AC Transfer & Safety Switch
- EN1126X: 2600W 12V with AC Transfer & Safety Switch
Package Contents:
- ePOWER Inverter base unit
- 7.5-meter remote control cable
- C19 IEC plug
- C20 IEC plug
- Owner’s manual
Safety Information
- Ensure proper eye protection and gloves are worn.
- Avoid exposure to battery acid.
- Ensure the area is well-ventilated and free from flammable gases.
- Do not expose the unit to moisture or water.
Installation Guidelines
- Install the inverter indoors away from direct sunlight and moisture.
- Allow at least 75mm of space around the unit for ventilation.
- Recommended wiring by a certified technician or electrician.
- Ensure the unit is properly grounded.
- Use insulated multi-strand low resistance copper cables for DC input.
- Recommended cable sizes:
- 2000W models: 70mm² for <1.5m
- 2600W model: 120mm² for <1.5m
- Install a DC rated fuse or circuit breaker on the DC positive line within 17.8cm from the battery positive terminals.
- Fuse/Circuit Breaker Ratings:
- 2000W 24V model: 150Adc
- 2000W 12V model: 250Adc
- 2600W 12V model: 350Adc
Operation
The inverter automatically switches between battery power and AC input based on availability.
- For USB only operation, press and hold the "Power/Select" button for 1 second.
- For AC and USB operation, press and hold the "Power/Select" button for 2 seconds.
Feature Settings
- PS (Inverter) settings range from PS0 (inverter disabled) to PS4 (inverter enabled with standby mode and load sense off).
- Sd (Under Voltage Shutdown) settings: SdL (low) and SdH (high).
- AL (Alarm) settings: AL0 (disabled) and AL1 (enabled).
Troubleshooting
- Error codes indicate specific issues such as low battery voltage (E01), high battery voltage (E02), overload or short circuit (E03), and high internal temperature (E04).
- Common solutions include checking battery connections, reducing load, and ensuring proper ventilation.
Specifications
- Output Power: 2000W or 2600W depending on the model.
- Input Voltage: 12V or 24V DC depending on the model.
- Output Voltage: 230V AC.
- Efficiency: >85%.
Warranty
Refer to the warranty section of the owner's manual for detailed information.
Appendices
- Appendix 1: Detailed installation diagrams and cable routing.
- Appendix 2: Remote control/display connection instructions.
Note
Ensure all installations and operations comply with local electrical codes and standards.
For any service-related issues, refer to the troubleshooting section or contact technical support.